frankenwrench
overkill is under rated!
Use the idi flywheel.As in use a Idi flywheel? Or the Powerstroke flywheel?
Use the idi flywheel.As in use a Idi flywheel? Or the Powerstroke flywheel?
Okay. Last question I do have a idi flywheel but don’t have the bolts that go into the crank. Any idea on where I could find those onlineUse the idi flywheel.
Not off the top of my head but in the tech section it has basically every part number and size known to these trucks. Il take a lookOkay. Last question I do have a idi flywheel but don’t have the bolts that go into the crank. Any idea on where I could find those online
Perfect I appreciate itNot off the top of my head but in the tech section it has basically every part number and size known to these trucks. Il take a look
Ok haha school me kn the starter you got me worried jowHonestly never tried that. Did the pressure plate for an idi as well as flywheel and clutch disk and throw out bearing. Just the powerstroke transmission. Some of it may work from the powerstroke, but I don't know it for a fact other than the transmission itself as well as the starter. But the starter is another topic. As for the question at hand, I used a luck clutch single mass flywheel and clutch disk and pressure plate for an idi.
Thank you you saved me a massive headache hahaNo worries, the first gen psd starter is the same and can be used on an idi. Having issues on finding the bolt specs for the flywheel. Hopefully someone chimes in with better knowledge than I on that particular matter
Idi is the one i used.As in use a Idi flywheel? Or the Powerstroke flywheel?
I don't believe so either. Only the idit is different I believe. 6.9 idi and 7.3 idi I believe are same.Idi is the one i used.
Again mine is a 6.9l but I don't believe them to be any different