Parting 1990 F350 crew cab - good body - what do you need ?

[OnDaRoad]

Joe took the tires & rims

Do you have the rim's and tires? Need 4 centerline rims, no offset?

Bill,

Joe took the tires & rims - otherwise you could have had them.

Jim

 

[OLDBULL8]

I got 2 7000# axles for the trailer I'm building but no rim's or tires. The 8x16 6.5 BC from 96 back will fit as long as they are centerline.

 

[A_G]

How much for the front doors, power Windows and locks? Will u ship them?

 

[OnDaRoad]

PM sent ....

How much for the front doors, power Windows and locks? Will u ship them?

I am leaving tomorrow for California ...

I could pull the complete doors - both front doors had motors
replaced in thel last year ....

I am coming across I-44 & I-40 and could bring
them with me ...

PM sent


Jim

 

[OnDaRoad]

XLT tilt steering column pulled ...

XLT tilt steering column was pulled when clutch & tranny removed,
has cruise steering wheel ...

Still have steel injector line set w/ clamps and IDI pump,
both are less than a year old ....

AC components including good NAPA compressor ...

Fuel filter tower - PS pump - vacuum pump ....

Good blue interior .....



Jim

 

[briang]

how are the rear doors, and what do you want to get out of them?

they will fit a 92 right?

any approx weight so i can figure out shipping ups

thanks

 

[OnDaRoad]

Not sure ....

how are the rear doors, and what do you want to get out of them?

they will fit a 92 right?

any approx weight so i can figure out shipping ups

thanks

Rear doors have no rust - glass and trim are good.

Not sure if they will fit a 92' ......

Make an offer by PM,



Jim

 

[junior20762003]

how much for the bezel and A/C vents and xl plastic decal along with climate control lol

 

[OnDaRoad]

Speedometer head ?

Do you mean the speedometer head cluster
when you say " bezel " ?


Jim

 

[snaponprofile]

I need the two front leaf sping hangers. Not the front/front ones, the rear/front ones.

 

[OnDaRoad]

Too much work ....

I need the two front leaf sping hangers. Not the front/front ones, the rear/front ones.

I would have to pull the rear end to do that ...

Then truck would not roll ....

Those are riveted on - you are better off to buy new ones



Jim

 

[snaponprofile]

No, I need the ones for the front axle. The rear shackles on the front leaf pack.

 

[bigblue85]

how much for the ats???

 

[OnDaRoad]

No front leaf springs ...

No, I need the ones for the front axle. The rear shackles on the front leaf pack.

This is a 2WD truck - it has front coil springs


Jim

 

[OnDaRoad]

Turbo has been sold

how much for the ats???

Turbo sold a couple weeks ago ..



Jim