Injector Lines / Kit for a '93 F-250 7.3 IDI

[Neal Evans]

Good afternoon,

Have my F-250 in the shop and mechanic is telling me that the #3 and #7 injector lines need to be replaced. We're having a hard time finding any--either from junk yards or new.

Any suggestions on where I can get some new ones? A kit for all 8 lines would be preferable.

Thanks for your help and Happy New Year!

 

[tradergem]

Try the nearest International dealer or Ford dealer. I got a new #7 injector line from a Ford dealer in Temecula, Cal. But they had to order it and it took a week to get it.

 

[gnathv]

Accurate Diesel $270 plus shipping for set

 

[rewbrooks50]

Accurate Diesel $270 plus shipping for set

I have had these on my F250 IDIT. Fit good and no problems for two years.

 

[atc92]

Ford 6.9L / 7.3L IDI Injection Lines 1983 - 1994 | eBay

Ford / International 6.9L and 7.3L IDI engines from 1982 - 1994. Trucks in northern states usually exhibit very rusty and pitted lines further worsening the situation. Injection lines that have been bent during service can flake internally causing repeated fouling of fuel injectors.

www.ebay.com

 

[OlKoot]

7.3 IDI Injector Lines | 6.9 Diesel Injector Lines | Accurate Diesel

Refresh your vehicle with new injector lines from Accurate Diesel! This set is compatible with 1982-1994 Ford 6.9 and 7.3 IDI and International T444 engines.

www.accuratediesel.com

cheaper than ebay, you can by them with or without the clips.

 

[TNBrett]

Be aware that some of the aftermarket lines are 6mm instead of 1/4”. They should work fine, but some of the transducers for the timing meters will not work on the slightly smaller line. Also, make sure you are using the clamps to support the lines. They will live longer.