askikr79
Full Access Member
I just replaced all mine last week. I was having a issue with my GP controller. It would not turn off. the plastic housing around the relay was melted. Before I changed the plugs I performed the "manual" control mod.
My plugs were very easy to change(all beru's). All of my connectors were just metal. The insulation rotted of long ago. I took some air and blew around the plugs to get the area clean. I thought the debris was pecan shells from a rat eating around my engine but figured out it was the connector insulation. I used anti-seize on the new plugs.
A wiggler socket is a MUST imho.
Made a HUGE difference in the way it starts. I love the manual control also.
My plugs were very easy to change(all beru's). All of my connectors were just metal. The insulation rotted of long ago. I took some air and blew around the plugs to get the area clean. I thought the debris was pecan shells from a rat eating around my engine but figured out it was the connector insulation. I used anti-seize on the new plugs.
A wiggler socket is a MUST imho.
Made a HUGE difference in the way it starts. I love the manual control also.