larson
Full Access Member
Are the 9th gen f250's supposed to have a little bit of positive camber?
Front tires screwing with my eyes.
- Thread starter larson
- Start date
2wd or 4wd?
larson
Full Access Member
2wd
No. You should not have that much noticeable camber, jack it up and check the ball joints. Do you have lift springs or spacers in the front? If you try to lift these front ends it adds a ton of camber that cannot be adjusted for.
larson
Full Access Member
No it stock.
Have you checked out your pivot bushings? Mine were horrible in my 91. I'd hate to see you go in for an alignment to a shop that doesn't know any better...
needlenose
Full Access Member
Did you notice this after you backed in somewhere? Mine will +camber in reverse. Pulling forward flattens it back out.
madpogue
Full Access Member
^^^^ Ditto with ours, but I _thought_ that only happened with the 4x4 trucks....
Yours cambers in reverse? Are you sure you’re not getting confused with toe in?
Camber think Honda’s with wheels that aren’t perpendicular to the road. Toe is when both front tires are not parallel.
Camber think Honda’s with wheels that aren’t perpendicular to the road. Toe is when both front tires are not parallel.
