79jasper
Chickenhawk
Maybe. Or it could just be normal for a obs.
Sent from my SAMSUNG-SM-G935A using Tapatalk
Sent from my SAMSUNG-SM-G935A using Tapatalk
Maybe. Or it could just be normal for a obs.
Sent from my SAMSUNG-SM-G935A using Tapatalk
Nah.
But the early trucks do actually run rough compared to a newer 7.3.
Sent from my SAMSUNG-SM-G935A using Tapatalk
Long hot start is usually hpo related (injector orings, rail plug orings, worn hpop, or ipr orings and/or Solenoid)
Sent from my SAMSUNG-SM-G935A using Tapatalk
Well....
First I had the hpop gasket leak (or so I thought)
When was putting the oil lines back on, I thought I stripped the fitting going into the hpop (obviously not, or it would've blown out lol) then the orings in the fittings leaked.
Being tired of fighting it, I replaced it. Get ahold of corey at cncfab and get the mb diesel hpop. (If you do end up replacing it)
They do have a weep hole. Also the ipr can leak, the end cover, and the non-serviceable plug.
Sent from my SAMSUNG-SM-G935A using Tapatalk
Well clean it real well, then have someone else clean the spots you missed, then you clean the spots he missed. Repeat 3x. Lol
Then just start it and use a flashlight and inspection mirror.
Sent from my SAMSUNG-SM-G935A using Tapatalk
If it is the hpop, it'll show pretty quick.
Sent from my SAMSUNG-SM-G935A using Tapatalk