Ok, all was straightened out by Carson. Back together and in the truck. Been busy haven't had time to update.
Had a friend remake the engine ID decal
You must be registered for see images attach
Front crossmember beefed up
You must be registered for see images attach
Took the front axle to have the true trac installed
You must be registered for see images attach
I guess it's a good thing I didn't slam it in as the firewall was a mess. Whoever installed the downpipe cut too deep and it tore apart. Cleaned it up and welded it together as best as I could. Was hard scraping all the seam sealer out.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Got a little carried away checking the clutch fork movement. Luckily a friend works at a welding shop and fixed it up.
You must be registered for see images attach
Bolted in for good
You must be registered for see images attach
Intercooler mock up
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach