crashnzuk
Full Access Member
Is that an overdrive trans?
Travis..
Travis..
sure do!!!!
You must be registered for see images attach
I made the tranny mount off of the old one I had on the automatic. The crossmember I made from a piece of allis chalmers frame.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Had to raise the body about 6-8 inches to get it to fit. I didn't raise the bed because my gooseneck ball and stacks and stuff. No one notices unless I tell them anyway.
You must be registered for see images attach
This is an remote either adapter from a John Deere 4020 or 310 back hoe. Pretty neat so you can either from the cab of the truck.
You must be registered for see images attach
It's pretty neat I can pull what ever I want and with the 2 disk clutch I should never wear it out.
Is that an overdrive trans?
Travis..
The G56 that you want to get is from the 06 and up trucks. They have a higher overdrive ratio than the previous ones.