Search results

  1. B

    T19 third gear problem

    I'm rebuilding a wide ratio t19 but my third gear has some pitting on it. Looking around for the 24 tooth gear, the t19 gear is around three times as expensive as the t18 gear. Does anyone know if they will interchange or the difference between the two? Thanks
  2. B

    6.9 idi parts moving sale

    No lieing, simple math three engines and three injection pumps adds up to 300...
  3. B

    6.9 idi parts moving sale

    I'm not trying to screw anybody over, everybody want to Jew you down... And my plan was to load you up with a ton more parts than what was pictured....
  4. B

    6.9 idi parts moving sale

    All three engines complete minus a set of heads, if you could get them in the next couple days. I would do 300.00
  5. B

    6.9 idi parts moving sale

    Ford have three 6.9 idi engines, would say all need to be rebuilt. I also have several injection pump and many other parts. Moving in a month or two, so I would like to sell all three quick and cheap. Located outside Sacramento CA 95638 Text 916-479-0774
  6. B

    cheap injection line socket.

    That glow plug tool does look interesting and easy enough to make. I have always used 1/4in drive socket and a flexhead ratchet.
  7. B

    cheap injection line socket.

    I think the radius of the 3/4in end mill i used added a lot of strength to it, but you could still feel it opening up if you put to much tension on it. In the end it worked fine.
  8. B

    cheap injection line socket.

    The socket was very hard, here are some more pictures. I was able to get to the bottom injection lines but i did have to use it on a breaker bar and a piece of music wire to manipulate the socket.
  9. B

    cheap injection line socket.

    It is a 5/8 socket look at the picture in the vise. Must of had the wrong tag. Yes it is 1/2in drive.
  10. B

    cheap injection line socket.

    It was already pushed as hard as I felt comfortable doing, to get were i got.
  11. B

    cheap injection line socket.

    So i purchased a new injection pump a few months ago, i installed the pump without any problem and the truck runs great. But when i went to time it i was still about 1deg short of setting the proper time and not wanting to pull the injection pump to rearrange the hard lines its been that way...
  12. B

    Injector nozzle replacement and rebuild

    The autozone injectors are made by someone else and have a different part number.
  13. B

    Injector nozzle replacement and rebuild

    I have an autozone injector I will open it up and see. Are there any non Chinese made injectors currently being made?
  14. B

    Parting 89 f250 4x4

    250 Shipped? Could i get a picture? Hydro boost conversion with recent rebuilt booster. Comes with everything needed including 5 speed pedal bracket 275 shipped obo
  15. B

    Injector nozzle replacement and rebuild

    I should have said they were used injectors but still they were advertised as good injectors. His user name was egre8431. That engine is a min bike with a torque converter.
  16. B

    Injector nozzle replacement and rebuild

    After buying some craptastic BB code injectors off of ebay, which ended up being all frozen, I took them apart and googled the part number. In doing so, I found a Chinese manufacturer that makes replacement nozzles on AliExpress. I decided to roll the dice and buy a set. Just to clarify, I'm...
  17. B

    86 IDI tries but won't start

    New motorcraft glow plugs, still not starting. I think I need to do a compression test?
  18. B

    86 IDI tries but won't start

    A little update. With trying to find the glow plug problem I found that the coolant temp sensor for the cold start advance was not plugged all the way in making the cold start solenoid not always work. Also all the acdelco glow plugs I just put in are dead, a few were even swollen. So I...
  19. B

    86 IDI tries but won't start

    I've tried to give it some crack but all they have in this great state is "starting fluid" no ether because of voc's. With starting fluid it will shake and knock but not start.
  20. B

    86 IDI tries but won't start

    No I don't have the cord and it's currently 100+ degrees outside.
  21. B

    86 IDI tries but won't start

    Thanks for the replies - I have jumped the relay, across both main terminals to bypass it and jumped it between the small and large post in order to actuate it. Neither of these dimmed the lights. But, with a voltmeter, and actuating the relay, I could get 12 volts on the other side of the...
  22. B

    86 IDI tries but won't start

    I recently bought a 86 IDI 6.9, non-running. The seller said the lift pump was bad. Turns out the lift pump is fine, but it still won't start. Here is what I've done so far to try to get this thing to start: - new glowplugs (AC Delco - the only non-autolite glowplugs my parts store has) -...

Latest posts

Forum statistics

Threads
91,287
Posts
1,129,814
Members
24,106
Latest member
lewisstevey7

Members online

Total: 787 (members: 8, guests: 779)

Share this page

Top