Search results

  1. 9

    What torque for the waterpump bolts

    I'm replacing one away from home and don't have my manual with me.
  2. 9

    SMF flywheel that uses stock DMF pressure plate

    Do you guys know if someone sells a single mass flywheel that accepts the stock DMF 6 bolt pressure plate and 11" clutch? I just bought a SMF to replace my Lucky modded flywheel, but its for a larger clutch with an 8 bolt pressure plate.
  3. 9

    WTB: Complete 6.9/7.3 IDI Turbo kit

    As the title says.
  4. 9

    Pyro necessary on a stock truck?

    I have a 97 that I will be towing no more than 7000 lbs with. It is bone stock so is there no need for a pyro gauge? I was planning on at least doing a 3" downpipe with a 4" exhaust.
  5. 9

    Worth it to run two fuel filters?

    My 87 has a racor water separator in place of the stock one. I believe it needs a new filter. Should I replace the filter in it or just leave it out and let the main fuel filter do it all? For what its worth, I'm running prefiltered WMO through it as well.
  6. 9

    Starter doesn't stop cranking

    When I turn the truck to the on position the starter cranks and will continue spinning while the truck is running. It looks like the orange wire that goes to the top of the starter solenoid has continuous 12v, causing this to happen. Is this a short somewhere or could it possibly be a bad...
  7. 9

    CL deal in central CA

    http://slo.craigslist.org/cto/1863735034.html I dont know what kind of offer this kid is looking for but for all the parts on there it could be a good deal.
  8. 9

    Glowplugs on while starting

    My truck has the glow plug system hooked up to a button on my dash. Is there any reason I shouldn't keep holding the plugs on while I am turning over the truck? Do the trucks work like that from the factory with the plugs staying on while starting?
  9. 9

    Nice Cali (530) truck

    93 turbo 5speed xlt http://goldcountry.craigslist.org/cto/1644882354.html
  10. 9

    WMO/WTF filter lifespan?

    I'm running a 13gpm transfer pump into 2 spin on filters, the first is a 10 micron and the second is a 2 micron. Its this filter and its about the size of a powerstroke oil filter http://www.jmesales.com/item/35561/Cim-Tek-200-Series-Fuel-Filter.aspx My problem is that I am only getting about...
  11. 9

    E brake pedal pops off

    Is there a fix for this problem. It pops loose frequently, one time almost drowning my truck on the boat ramp.
  12. 9

    Hydroboost, what to take from the f450

    I have an 87 with the zf5 and I found a 88 superduty with the same transmission. I need to pull the hydroboost unit, the attached lines, and the reservoir on the pump. Is there anything else that I should get? I see some people take the larger master cylinder and some dont. Will I need the...
  13. 9

    ZF5 inspection cover NEEDED

    Does anyone have an extra they would sell me? From what I read, one from a 4 speed would work also. Thanks
  14. 9

    T-case shifter boot orientation

    On my 87, is it supposed to be bolted on top of the carpet or below?
  15. 9

    Headlights flicker on/off when high beams are on

    The headlights work fine when the highs aren't on. There is no rythm to it. Is this probably my headlight switch?
  16. 9

    Good source for filters

    http://www.petroparts.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=183200H34&Category_Code=FIL They have good deals on spin on filters. 10 micron for under $5 and filter heads for $11.50
  17. 9

    >5 Micron spin on filter

    I am looking for a 5 micron filter or less that I can spin on my perma cool transmission filter head. I no longer need the transmission filter so I was going to use it to filter used atf. Its a pretty standard 3/4"-16 thread.
  18. 9

    Intercooler with inlet/outlet on same side?

    Is anyone running this set up? For my application I think it would be easier to plumb because of my coolant filter.
  19. 9

    How do you get to the heater core on a 87-91

    Does the glove box pop right off its hinges? Then what?
  20. 9

    Pyroil diesel fuel treatment?

    Is this stuff worth using? A guy near me is selling 23 cases of it for a good price.
  21. 9

    IDI Ford engine parts and other misc. parts

    I have just about all the parts to build a complete 7.3 motor minus the block. I also have a 4x4 c6 which i believe blew a front seal. PM me with anything you need. flexplates good 7.3 heads rockers lifters valve covers valves rods good crank cam
  22. 9

    found a TTB lift bracket

    Found this in the pick n pull. Anyone recognize what company made this bracket? How much is a good price and how much lift do you think it is?
  23. 9

    Will my trucks wiring harness have the clutch interlock plug?

    My truck is the one in my sig. Will my harness have the plug for a clutch interlock switch?
  24. 9

    Central coast parts truck

    Get a zf5 and 7.3 for $500, plus the rest of the truck. http://slo.craigslist.org/cto/1263360069.html This was my first truck, and before that was a ranch truck, it runs great but needs a new clutch. Also, the registration is overdue and is about $600. I would like to keep it and fix it up...
  25. 9

    What are these ZF5 connectors?

    These are the plugs that came off the zf5 i bought for my c6->ZF5 swap. What are each of the plugs for? For the people who have done this swap before, what have you done with the neutral-safety wires that went into the c6? Can I splice them into the ZF5 wires to get a functional safety or do...

Latest posts

Forum statistics

Threads
91,333
Posts
1,130,534
Members
24,136
Latest member
m2rtin

Members online

Total: 893 (members: 11, guests: 882)

Share this page

Top