Shawn MacAnanny
Full Access Member
Driver side either right at 8 or slightly forward i cant remember ill get a pic tomorrow
The installation of the catch can resulted in a leaking from the front crank seal which i believe is because of the slight pressure on the crank case resulting from the loss of ever so slight vacuum of it tied directly to the intake. I dont think the oil is too much of a problem, many run waste oil, some run water injection, really all of that going back into the engine shouldnt hurt anything so long as it doesnt gunk up the valve but my intake manifold looked really clean.
I don't think the thin layer of oil inhibits heat transfer that much.