P
o
r
n
time...
Greenlee punch for bx fitting in background, doing a 3/4" harpoon vent mod
Harpoon mod setup
And yes the yellow ptfe tape is petroleum rated. The white is NOT.
Modify the rollover valve by cutting the top off @ the nipple port.
TAP ALL THE WAY DOWN, for the front tank.
Sink it an inch deeper for the rear tank as its right under the bed floor.
Check fit as you go so it's still snug.
o
r
n
time...
You must be registered for see images attach
Greenlee punch for bx fitting in background, doing a 3/4" harpoon vent mod
You must be registered for see images attach
Harpoon mod setup
You must be registered for see images attach
And yes the yellow ptfe tape is petroleum rated. The white is NOT.
You must be registered for see images attach
Modify the rollover valve by cutting the top off @ the nipple port.
TAP ALL THE WAY DOWN, for the front tank.
Sink it an inch deeper for the rear tank as its right under the bed floor.
Check fit as you go so it's still snug.
Last edited: