Figured I'd play with my new battery crimper today so I can finally get the good cables on Tank. That way I'll be able to put the other cables on Diego where they were supposed to go in the first place. The cables on Diego are beyond questionable and at the point of wow they still work?
Kopr-Shield went on the end of the cable and in the terminal before crimping. First I crimped with the 3/0 dies to get it started and then I went in with the 2/0 dies. Crimped halfway, rotated a notch then went over them again the first direction to knock down the burr left by the pinch seam.
I put a little more Kopr-Shield in the small space between the lug and the insulation before covering it with some adhesive heat shrink. This is the starter lug FYI.
Kopr-Shield went on the end of the cable and in the terminal before crimping. First I crimped with the 3/0 dies to get it started and then I went in with the 2/0 dies. Crimped halfway, rotated a notch then went over them again the first direction to knock down the burr left by the pinch seam.
You must be registered for see images attach
You must be registered for see images attach
I put a little more Kopr-Shield in the small space between the lug and the insulation before covering it with some adhesive heat shrink. This is the starter lug FYI.
You must be registered for see images attach
You must be registered for see images attach