Alright so now the transfer case is in! I have a pigtail that fits into the 4407 with two wires. A light blue wire and a light blue/black wire. I have been trying to figure out where both these wires splice into the harness. Anyone get this 4x4 indicator light to work?
Sent from my iPhone...
Yep it’s a 155”wb extended cab long bed f350. I was wondering if you might be able to take a picture of your driveshaft connected to your 4407? Measurements would be awesome!
Sent from my iPhone using Tapatalk
Has anyone here done a 4x2 e4od to a 4x4 zf5 swap in an extended cab long bed? I'm nearing the point of having to modify my rear driveshaft but i'm not sure if my two piece rear driveshaft will work with the swapped zf5+4407
Nope that’s exactly what I was looking for. Thanks! There is definitely a difference between the 4x2 and the 4x4 crossmember. Which transfer case do you have there btw?
Sent from my iPhone using Tapatalk
Does anyone have any pictures of a 4x2 zf5 crossmember and a 4x4 zf5 crossmember? I'm getting conflicting reports of both will work and no they won't work. Thanks!
Alright so I gotta extend my rear driveshaft a bit I believe. My current driveshaft is out of a 2wd E4od f350 dually. It is currently a 2 piece but will extending it have any repercussions? Should I just go with a 1 piece? Do you just extend the front portion? Also have to put a flange end at...
Alright guys so I am getting my hands on a zf5 s47 and the BW4407 transfer case. From what I have read I think the driveshafts are gonna be different sizes. Now I need to find me a rear driveshaft that will fit an extended cab full size bed 155 wheel base.
Alright sweet. I didn’t know if the transfer case would get in the way of anything while it sat there by itself for a little while.
Sent from my iPhone using Tapatalk
Hey guys Ive been searching the forums for this specific subject but I couldn't find an answer. I have a 1992 F-350 Dually 2wd E4OD. I plan on doing a full swap of a 4x4 Dana 60 up front and a ZF-5 but I don't know if I can do it all at once. Heres the question:
Do you think a 4x4 ZF-5 would...
Well thanks to everyone’s advice she’s running again! Installed new motor craft glow plugs all around, new injector o-rings, new return fuel lines, and what I believe actually got it running again? New powermaster 9050 starter. I guess the old original starter sounded good to my ears but it...
Gotcha. After recharging the batteries, the starter sounds like it used to when it started after the first couple cranks. I definitely cannot count the amount of times it cranks when it does so I assume it is ok?
Ok I will also try that as well. I figured since I haven't lost prime at the fuel filter I have fuel coming from the tanks and through the fuel selector valve.
Recently its been about 50 degrees during the day and around 25 at night. When I wait for the "wait to start" light to go away, I can hear the glow plug relay clicking several times but I will go and check each individual glow plug.
Alright so story time!
I bought a used 1992 F-350 7.3 idi non-turbo. Drove it for a few months with no issues. Finally decided that an oil change/fuel filter change was needed. Changed the oil and fuel filter. I added 3/4 diesel fuel into the fuel filter and actually drove fine for a day...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.