No. The hid high/low only has one bulb. When turned to high beam the bulb is just moved to a different angle. You would probably ruin them if you tried.
It is ULSD
Nothing real special. Run #1 and a winter front(grill cover). I think about the coldest I have had Crummy in is -65 and it ran fine. Coldest I have ran a Cat engine is -72 and it ran fine but sounded bad. Block heaters and oil pan heaters are a must before you fire them off though...
Yep straight #1. All that is available at most pumps is #1. In a few locations you can get -20 blended. The -20 is like 70% #1 and 30% #2. At times it wont come out of the pump. 50/50 would not come out of the pump all winter.
Don't know that they list one but when I am chained up in the big truck I try and keep it under 50mph or the chains start melting into the tires. I have ran them at 60-70mph when getting a run at a hill but sustained high speeds will tear the heck out of the tires. I have never ran them down the...
1. Was there any antigel in the fuel PRIOR to gelling. - Yes
2. What brand/type antigel was already in the fuel PRIOR to the fuel gelling. - Diesel Treat Howes Diesel Conditioner Plus Anti-Gel
3. What mix-ratio ounces/gallon was the antigel. Double dose as per instructions on bottle.
4. What...
Thats what we run up here. For my plow truck I use a set of truck chains cut down to fit but you can get Trygg's made to fit anything from a ATV to heavy equipment. TRYGG tire chains are manufactured from ultimate alloyed steel which contain chrome, manganese, nickel and boron. They are...
Outside pins are the Glow Plugs.
Get a piece of fuel tubing that will fit over the Glow Plug tight and use it to unscrew - remove and install them. Will take a deep socket to break them loose and tighten them but the socket will bind if you try and unscrew them all the way with it. If you...
If you do unplug it you might want to install a Exhaust Backpressure Sensor Code Eliminator. This will keep the check engine light off.
Also available on ebay.
OBS - Old Body Style
EBV - Should be EBPV - Exhaust Back Pressure Valve
Out of control valve is normally caused by a clogged sensor tube. There is a tube that runs from the passenger side exhaust manifold up to a sensor on the front of the engine. The tube gets plugged with soot and...
Allied Electronics also carries them. Been a few years since I purchased mine but if I recall Mouser Electronics is a little cheaper on the relay but once they both figured in shipping Allied was cheaper. This was a few years ago and shipping is usually high to Alaska so it could be different...
LOL Took a while to get a stir out of anyone ;p
I will go join to see if they bite and report back :D I am telling them you sent me
edit: Yep they do bite. Where did I put my band-aids....
Where are the pictures Mel ??
In my opinion a long hood with a day cab looks out of proportion. With a small sleeper a long hood looks good but a short hood looks better with no sleeper. Short hoods hold up better too. The front fenders have been replaced three times on the 379 extended hood I am currently driving and it...
Highway trucks up here already weigh from 23,000-25,000(or more) so another 2000 would put them over the top. Down in America where they weigh around 18k it would be a little easier to hide.
A short truck up here is 280wb but most are in the 300-320wb range. Heavy frames. 400 gallon fuel...
Just have to trick the computer. Many guys up here run Pittsburgh Power.
pittsburgh power has the best add on performance computer for truck engines. They offer units for Cat, Cummins and Detroit. You can get 700 hp out of your 525 N-14 Celect Plus with the unit. Only $2,395 for the power to...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.