Search results

  1. yARIC008

    Lots of oil in my intake and intercooler tubes and intake tube.

    For your test the RDT just needs to vent to atmosphere. The point of putting it under the truck is to try to use veturi to help pull gases out, it isnt neccessary for it to just vent though. Did you look in your hose to make sure it wasn't clogged with something. No way 1" tube is not letting...
  2. yARIC008

    Occasional hydro lock? Huh?

    Sounds exactly like what happend to me with cavitation, shortly thereafter got massive amount of oil coolant mix. Simplest thing to do is just send an oil sample to blackstone, they can easily tell you if it's fuel, coolant, or oil (unlikely unless head is cracked). We can all sit around and...
  3. yARIC008

    rounded flare nut - GAH!

    well if my pictures would upload I'd show you, but don't look like rust, infact the threads look really clean, except have a red color. It's not an orange red rust color but looks just red to me. I suppose anything is possible though.
  4. yARIC008

    rounded flare nut - GAH!

    Well I got the situation kinda sorted out. I ended up cutting the thing out and buying a new brake line that was pre-flared with fittings on it from autozone. I haven't gone out and put it in yet as it hasn't stopped raining in like 3 days now. But I took some pictures of it all but can't get...
  5. yARIC008

    I can't upload images via attachment or insert image...

    I can't seem images to upload anymore either. I tried changing the general settings thing as you said here, but now when I try to upload I just the following error... Fatal error: File system directory "./attachments/1/3/7/4" is not writable or cannot be found. Please create this...
  6. yARIC008

    rounded flare nut - GAH!

    I have straight jaw vise grips, they didnt seem to help... I'm heasitant to use a torch here as it looks like there is probably alot of flammable stuff down here such as insulation and now alot of wd-40 and pb blaster. I really like the pipe wrench idea, the question is will one fit here...
  7. yARIC008

    DB2 Pump

    Little dirt never hurt anything, lol.
  8. yARIC008

    rounded flare nut - GAH!

    I've been fixing some misc. things on the van lately and one of things I wanted to replace was the flexible brake lines from the body to the calipers. They were starting to look a little old... On the drivers side there is two brake lines that come together at the flexible line fitting. I get...
  9. yARIC008

    starter??

    Sounds like it's time for a new starter to me.
  10. yARIC008

    How to replace your mechanical fuel pump with a Facet Duralift electric fuel pump

    I would think the fuel in that little loop would end up getting very hot from just general engine heat and from being pumped constantly and will probably end up damaging the pump.
  11. yARIC008

    Installing E pump.

    I'm working on my fuel pump this weekend finally and I'm rigging the electrical to a switch under the hood that allows me to have it set to manual control or automatic. That way i can easily turn the pump on and prime the fuel filter when under the hood and look for leaks if need be. I did...
  12. yARIC008

    major engine trouble.

    Something else has to be going on here. A valve job won't destroy your rings, theres just no way if it was a proper valve job.. Are your oil sprayers working under the pistons? Are the pistons cracked from your ether spraying or overheating? Did your oil get some contaminate in it and take...
  13. yARIC008

    How rare are IDI E350 passenger vans?

    I've actually never even seen another IDI van that I know of in person. I've probably seen one from a distance and just didn't know it was an IDI I'm sure... That last link there on autotrade for the 1992 van is only about 5-10 miles from my house. I'd say powerstroke vans are pretty rare...
  14. yARIC008

    leak at the injector pump

    Guess I must have missed that discussion about 10,000 times. Thanks.
  15. yARIC008

    leak at the injector pump

    Okay, so on the back of the pump you've got the 8 lines going out to the injectors and there is a line right in the middle that brings fuel into the pump. My line is leaking. A long time ago I discovered the leak and upon inspecting that line, it has a little gasket deal down in it unlike the...
  16. yARIC008

    Van conversion

    Here are a few pictures from my engine job about 10 years ago now. My website domain expired and I don't have them up on my site anymore, not sure who all remembers these from the TDS days... It is indeed a tight fit.
  17. yARIC008

    Totaly lost w/E4OD problem

    I bet they couldn't communicate with it before the rebuild too... ever just consider the fact the the computer could be shot? Not sure what would really go bad with it but if it won't communicate and all the wires are good, doesn't really seem like much more could be going on with it. Find the...
  18. yARIC008

    Starting to stall at low idle - Injection pump?

    This happens alot to me when switching from bio back to regular diesel. Just pour a bottle of diesel kleen your tank when you're about 1/4" full on the tank. Then just run it, will clear the metering valve up. That's easier than messing with filling the filter and all that jazz. Unless you...
  19. yARIC008

    i got a recall in the mail today

    Just disconnect the wire if you have one.
  20. yARIC008

    7.3 diesel

    What's that about the odometer? The 92 should have the digital odometer. I'll read up to 399,999 but then just roll over back to 300,000 (from what I'm told, i'll know soon first hand in the van soon). If it says 94,275 that's how many miles it should really have unless someone was sneaky and...
  21. yARIC008

    indoctrinated

    Have you considered using a manual glow plug switch? When trying to get fuel primed into everything while cranking the engine you don't want the plug to be firing up every time and running your bats down as happened to you. Usually when my fuel filter would be empty it would take about 15...
  22. yARIC008

    indoctrinated

    I finally got my problems fixed after a year or two. Here is a list of where all my leaks were - Return lines - The hard line going from the fuel filter to the injection pump. The line wouldn't seat properly for some reason and was always loose, so I pulled it off and made a little homemade...
  23. yARIC008

    manual econoline parts

    I always wanted to take an E550 and put a passanger back on it, or something like that anyways, make a super van. The E550's we just so cool.
  24. yARIC008

    Who runs Bilstien shocks?

    I got them on the van. They were like night and day going from the old Ranchos to these, they keep the wheels glued to the ground. Not sure what model I got but they had some heavy duty RV version for the van so I got those. Those things were so damn STIFF, it took me quite a while to figure...
  25. yARIC008

    Timing Meter Rental Bad News

    You need tracking on it at least so you can see where it's at. You could give the person the option for the signature. If they don't want it required and then they claim the thing went missing after the tracking number says it was delivered, well screw em, they have to buy you a new one.

Latest posts

Forum statistics

Threads
93,001
Posts
1,155,998
Members
26,589
Latest member
tke395

Members online

Total: 927 (members: 2, guests: 925)

Share this page

Top