Search results

  1. adam g

    Tipping your mechanic....

    Roland you must be going to the wrong shop. We very seldom do over the estimate by$30 If we do we will call before doing the work. Half of our customers have been doing business with us so long that they just want it fixed they don't ask for or want an estimate they know we will treat them right.
  2. adam g

    Tipping your mechanic....

    I have a couple customers that tip me everytime that there in. They are good customers anyway. In fact if any of the customers should tip its not them. The customers that are a pain in the rear should tip, they are the kind that if you paid them to work on there stuff they would still think it...
  3. adam g

    A/C Question

    you can buy die kits at any parts stores cheap and it will show you the leak
  4. adam g

    Best 6.9 N/A Muffler?

    You can get magna flows in smaller sizes than the flows but its up to You
  5. adam g

    A/C Question

    In kansas its about 100 degrees out and static charge[pressure without it running] is between 95 and 110. It should be close to the outside temp. If it is close then look at low side pressure while its running. If it has a plugged orfice tube it will go to vacuum or fairly low. It sounds like to...
  6. adam g

    Best 6.9 N/A Muffler?

    I had glasspacks on one for over 6 years and it doesn't have any rust on it and still sounds great.
  7. adam g

    Best 6.9 N/A Muffler?

    n/a still run better with low back pressure
  8. adam g

    Best 6.9 N/A Muffler?

    Hey flowmasters aren't the best for diesels in my opinion. I would go with a straight through muffler. If you like quiet use a magnaflow if you like noise use a glass pack
  9. adam g

    Cleaning out the IDI Monster Garage!

    Mr Tosh what would you take for those rims? Will they fit an 89 f-250
  10. adam g

    Ignition Switch...Question?

    Check the starter relay on the rf fender. Just behind the battery. There under $20. Usually the old one gets a hole burnt in the contact.
  11. adam g

    Please do not bid. Wheels

    Darrin Tosh what do you have for rims and what are looking for out of them. I was hoping to wait for winter but just blew one of the old tires today. Now I debating just putting new tires on the stock rims or buying used alums.
  12. adam g

    DONT BUY FROM Ebay member "buyitnow-auto-parts"!!!!

    We had a similar incident on my street a couple of years ago. I just wish that restitution meant I could collect how I chose. I think I could have a nice long talk with this guy behind the shop.
  13. adam g

    DONT BUY FROM Ebay member "buyitnow-auto-parts"!!!!

    Wow What is the matter with people? The cars left at our shops parking lot all got vandalized this weekend. A guy took a screwdriver and broke the windshields out of the customers cars. The only good thing is he got caught in the act.
  14. adam g

    Brake question

    A quick test is to unhook the vacuum line from the booster, vacuumshould hold it to your finger at an idle. Boosters going out will usually make a hissing sound before they quit, leaking input shaft seal.
  15. adam g

    Nice IDI for $3200!!!

    If that second truck had a turbo it would be a buy.
  16. adam g

    Fuel guage problems ? 1994 F250 IDI 2 tanks

    On my 89 ground = empty and open =full
  17. adam g

    Loudest 6.9 in the world!

    My wife laughed too.
  18. adam g

    Bed R&R 1994 F250 ?

    I work in a shop that does a ton of fuel pumps we usually drain and drop the tanks seems easier.
  19. adam g

    hard starting - In the morning only

    good news
  20. adam g

    130 alt conversion questions.

    My old 7.3 went through alt and batts. when I had them in town. I will try the conv when I get time.
  21. adam g

    130 alt conversion questions.

    Ok I read the 130 amp alt install by Mr. Roboto. I think I will be doing this as soon as possible, mostly because I live in town. I do get a couple 30 mile one way trips in a week but mostly start it go a few miles and shut off. My thinking is with the larger alt my batteries will recharge...
  22. adam g

    hard starting - In the morning only

    correct.
  23. adam g

    hard starting - In the morning only

    A common leak is the fuel hose from the steel line to the fuel pump. I have seen the steel lines where they come out of the tank get pinholes. Seen a few leaking filters.
  24. adam g

    where to buy used alum rims and chrome bumpers

    I'm from the middle of kansas. The rattle can idea will be implemented as I build my tail gate out of square tubing and horse shoes. I will probably use a few when i cut out my rusted rear cabrocker panel out and replace it[supercab].
  25. adam g

    where to buy used alum rims and chrome bumpers

    Where does a guy get used or cheap aluminum rims, and chrome or stainless bumpers. I have my 89 f-250. The chrome bumper is rusted through. I will be needing tires this fall so I was trying to find used aluminums to clean up or just cheap but good. This is a budget project, as newlyweds and...

Latest posts

Forum statistics

Threads
93,001
Posts
1,155,996
Members
26,589
Latest member
tke395

Members online

Total: 914 (members: 6, guests: 908)

Share this page

Top