Search results

  1. Trevtron

    Critical safety warning: Hot Shots fuel additives products

    Bagbalm works good for skin irritations to
  2. Trevtron

    Oil pressure documentation

    Mine runs 15 hot idle and 45 cruising Cold high idle runs around 60psi I get slightly higher readings when I run Delo vs Shell
  3. Trevtron

    Water Pump

    Found a part # which makes it a lot easier to source, E3TZ-8509-D
  4. Trevtron

    Water Pump

    Got my new water pump installed, used rtv on the bolts which needed it. Problem is I had damaged my water pump pulley. So tonight I am still looking for the o.g. part # and am wondering if a 460 “3” V-Belt pulley is the same as our diesels. Or if anyone has one they’d sell them hit me up, thanks
  5. Trevtron

    Brand new to the fourm...Have a question

    FWIW here is a pic of my PS Pump all original
  6. Trevtron

    Just start using long unsued fuel tank?

    The NAPA part w/ the CRB line code is a good one
  7. Trevtron

    Hub Temps

    I’ve done that over the years too, just got curious tonight when I had that laser temp tool out to see what actual readings were
  8. Trevtron

    Hub Temps

    Back was cooler, I had shot my front hubs (it’s a 4x4). Wasn’t concerned about the readings, they were consistent. Just wondering if anyone else had used temperatures on any drivetrain components to look for potential issues. I’d be concerned if there was a 20-30* difference from the 2 sides,
  9. Trevtron

    Hub Temps

    Y’all ever use a laser thermometer and check the temps of the hubs? Shot mine today after a 20mile trip, was 125*F at the base of the hub at the rim and 110*F near the chrome ring. Might have been hashed out here before but didn’t see any hits on my search. More than anything was looking at...
  10. Trevtron

    Front cover removal

    Google NAPAeCatalog and then select nearest big city to you, You’ll have access to all NAPA catalogs, including lighting. They’re searchable and interactive
  11. Trevtron

    89 F250 parts

    Julian welcome to the site, looks like you had met thewespaul. He is the guy who I had mentioned earlier today when I had visited your shop.
  12. Trevtron

    Clutch still dragging :(

    That clutch fork pivot ball and clutch fork get worn down pretty bad too, something to keep in mind. A lot of folks don’t keep that pivot ball to clutch fork contact point greased and it gets gouged out pretty bad
  13. Trevtron

    Great Link to factory manuals

    chocked full of excellent catalogs in pdf format: http://www.icsarchive.org/icsarchive-org/private/Ford%201980-1989%20Truck%20Master%20Parts%20Text/
  14. Trevtron

    Post your cold starts, they’re fun to watch

    Spent a majority of my life in Alaska, always had IDI’s in the family. I recall some crazy cold starts, Good times for sure. If you look closely around the chrome by the hood you’ll see the snaps installed by Cal Worthington Ford of Anchorage back in Feb ‘83 for the radiator cover.
  15. Trevtron

    Post your cold starts, they’re fun to watch

    30* Cold start by SE Texas standards New injectors installed recently (thanks @Thewespaul) and had just timed it recently.
  16. Trevtron

    So what did you do with your truck today?

    Ran out to Bellville with my daughters and got some Toyo M/T’s put on. New shocks are ordered and will be installed this week, factory ones are hammered.
  17. Trevtron

    Smoking Sea Foam

    Part # 4106
  18. Trevtron

    Batteries load tested ok but voltage dropping

    Must have missed that skimming through the post
  19. Trevtron

    Batteries load tested ok but voltage dropping

    On my mid-tronics tester I’ve seen batteries test with correct voltage but way low on the cca’s, also in my experience it’s best to pull them out individually to test them in the future. I’ve seen lots of folks run the Legend batteries from NAPA (East Penn/Dekka) that held up reliably for...
  20. Trevtron

    So mines not supposed to do this?

    I tend to run in the lower rpm range, probably being over cautious but cant get over this gut feeling that an engine only has so many rpms to give in its life cycle.
  21. Trevtron

    1986 Ford F350 T19 Transmission HELP !!!

    Mines gtg, block heater was never used.
  22. Trevtron

    With a heavy heart......

    RIP sir, you will be missed
  23. Trevtron

    1986 Ford F350 T19 Transmission HELP !!!

    I don’t know but this may help ya.

Forum statistics

Threads
93,001
Posts
1,155,992
Members
26,589
Latest member
tke395

Members online

Top