Search results

  1. Spun4Fun

    Front Wheel bearing

    When we were replaced all breaks around the truck front left ( driver side) we had liquified runny grease pouring out of it but no sign of bead bearing at least what we though . Cleaned them well and repacked them with Synthetic lythuem high temp Grease and installed inner seal ... Now when...
  2. Spun4Fun

    Banks power Drain tube leak

    It was not the Oil sending unit ext , it was again the dip stick tube :mad:, Had my wife REV it pretty good and could see the oil pouring out . i pulled the tube out , cleaned it real good with break cleaner , cleaned the tube going to the oil pan , added nice O ring to the tube along with...
  3. Spun4Fun

    Banks power Drain tube leak

    Yah i borrowed an ACdelco one from my friend and it wasn't all that great maybe if i get a better quality one it will do the job ..! Would a loose Oil sending unit extension housing could do it ..Just thinking ( do they have an o ring in the fitting that thread to the block ) . I have an...
  4. Spun4Fun

    Banks power Drain tube leak

    Ok guys Test drive fail ..We got an oil gusher still plenty of oil like maybe 2 glass shots coming by the driver side covering the starter and down the ground , Valve cover sealed tight with no oil that pouring out of it to cause this much i even had some one rev the truck as am under it...
  5. Spun4Fun

    Need Help engine wont start after trying lots of things .

    Idioit http://www.oilburners.net/forums/showthread.php?71124-Resealing-plate-behind-water-pump/page2&highlight=reseal+front+cover Forget reading that thread , I think the best part about it was the wheelied golf kart Pic . I do appreciate that coming for a guy who race 2 wheels ;Sweet
  6. Spun4Fun

    Need Help engine wont start after trying lots of things .

    Leak down is the most accurate than Compression in this case since you testing compression on a cold Eng , I find it strange that all cylinder have equal PSI . If your Eng sat for 4 years that don't mean any thing .. Mine sat for 8 years and fired right up after we replaced the battery ...
  7. Spun4Fun

    Selling my 1994 7.3 IDI NA E4OD. How much ya reckon?

    Road trip sound good . Or even better . I will drive my green machine in my Sig to haul his wounded 4EOD an still enjoy the hot springs + ruby falls + a new pickup = perfect weekend!
  8. Spun4Fun

    Need Help engine wont start after trying lots of things .

    ^^^ good Video .. We done the same thing on a CAt660 mariene We used (propane torch ) . If you have the right compression & Timing you can start any diesel and run it on a french fries Oil if you want
  9. Spun4Fun

    Hub cap

    Any one have a spare front and rear center hub cap cover for f350 Dually just one side .
  10. Spun4Fun

    Selling my 1994 7.3 IDI NA E4OD. How much ya reckon?

    boy i wish this deal was closer to the east coast
  11. Spun4Fun

    hole in manifold

    I know real well about this area , My bloody hand still aching from working under that F*** FU&!%!$!$$$!$$!$$$ Valley pan . Like other mentioned put it back to factory and you will need one of these
  12. Spun4Fun

    Valve cover Bolt's& Gasket

    Amazing what a 72inch LB per bolt seems to do . In fact it felt a lot and there is no way i could of done it with hand and feel . FINALLY the green machine is bone dry during Idle and rev up .. ;Sweet. I am hoping my test drive goes well You guys rock
  13. Spun4Fun

    Valve cover Bolt's& Gasket

    LOL LOL .. Yah my sig not working with this Truck at all . It seems to apply to the 2 wheel world Yes i bought the FEL-PRO rubber gasket
  14. Spun4Fun

    Valve cover Bolt's& Gasket

    right On . Got it . Heading to get a small torque wrench as it's been long over due for one . I will check the washer triangle thingy LOL and report back
  15. Spun4Fun

    Valve cover Bolt's& Gasket

    i canfixall ..What dent you are referring to ...
  16. Spun4Fun

    Valve cover Bolt's& Gasket

    So what you saying is i could flip that triangle washer , Should i take the cover off again and apply RTV on the gasket mating the head ? :confused:
  17. Spun4Fun

    Valve cover Bolt's& Gasket

    i replaced the VC on my 93 7.3 already once , I got torque happy with the bolt's on the passenger side :eek: , I couldn't get it to stop gushing oil over the exhaust so i bought another set, replaced passenger side only and found one post that Torque should be set between 6lbft-8 . Local shop...
  18. Spun4Fun

    Banks power Drain tube leak

    Well finally after so many trial and error i was able to align the tube and she's bone dry when it reached op temp on idle . Took it for a drive and the VP remain dry :D:D But oil leak and smoke coming from the passenger side header ..:oops: did i over torque my new valve cover gasket...
  19. Spun4Fun

    7.3 idi injectors cap is leaking

    Started the truck so far the Injector cap are bone dry .. The Viton O ring did the trick for sure
  20. Spun4Fun

    7.3 idi injectors cap is leaking

    Viton O rings showed up yesterday , After i removed all 16 currently installed O ring on the Injectors and compared them it was very noticeable the different between the two materials , colors . I checked the casting flash as mentioned above , greased the new O rings and fitted every thing back...
  21. Spun4Fun

    Fluid chnage in E4OD throws a code!

    tbrumm .. It's usually a self satisfaction to do the work your self and you know darn right you will do it right , you will save ton's of $$'s & end up with new tools , I was originally going to pull mine down at the 1st time but due to winter i had the shop pulled it down and handed to me...
  22. Spun4Fun

    7.3 idi throttle Cable

    Yes i agree .. Some times the aftermarket not the best way to go ask me how i know . I ordered the OEM cable and it should be here some times .
  23. Spun4Fun

    7.3 idi throttle Cable

    cpdenton do you have any pic of the set up during and after the project is complete
  24. Spun4Fun

    7.3 idi throttle Cable

    ;Sweet I am keeping my eyes open for a local donor So i can collect all what i need to do it when time comes. Does the ZF5 must come from a Diesel or gasser will do as well
  25. Spun4Fun

    7.3 idi throttle Cable

    cpdenton I 2nd that ,i am going the same route . Plug and play and no need to rig slack up or deal with returns as am going thru the same ordeal with the reseal kit i bough from the local shit part store . On a side note i see your sig with ZF5 conversion .. :sly I was really...

Latest posts

Forum statistics

Threads
93,001
Posts
1,155,992
Members
26,589
Latest member
tke395

Members online

Total: 830 (members: 2, guests: 828)

Share this page

Top