Looking for a shift er for a 82 bronco 4 speed the Handel broke right off the tower or what ever you call it that bolts to the trans its the trans where reverse is all the day to the knee and up. Anyone have one
My 03 excursion with a 6.0 is a monster and super reliable also its npt tuned or deleted just maintained it has 308k on it and thats stock injectors and hpop the 6.0 is awesome where is this truck maby I'll buy it
Exhaust. Intake helps a chip helps too I'm a fan of stock on the psd except for letting it breath a lot better my 99 was stock except for 4 inch straight pipe and intake and I hot the scales at 19,990 for over 135k miles with nothing but basic maintenance
Also the truck is still running around...
Sounds like the pulse line for the carb to me if it was running good before I have an 029 sthil and if I run ethanol fuel in it once 6 months later I'm replacing that fuel line the pulse line is from the fuel tank to the carb they are about 20 bucks
If it was me and wanting to bump power a bunch with upgraded pump turbo and such id stud and re gasket the head and do the 6.9. Cooling mod as far as head work work while off it's cheap insurance
@chillman88 if it was mine id get it out from under the bed a 45 and a few feet of pipe and bump front of the tire keeps a lot of noise out of the cab also a turbo is abput the best muffler IV found for the idi
Last one I did I took a set of end wrenches some cresent wrenches a filter wrench a gallon of oil 5 gal diesel jumper cables 1 battery a few cans of either and fuel hose . it had been sitting for a few years I checked oil and water after adding battery and hooking up. Jumpers I tryed for a few...
Maby it's just how yours runs IV had several 7.3 s and they all had a slight haze until they had warmed up also IV replaced many injectors that buzz tested just fine see if you can do a cylinder contribution test
Iv had mine at 240 for over an hr with egt at 1000 and it didnt warp anything I will say once at the top of the pass we pulled over and the truck needed to catch her breath for abpit 30 min as I had the heater going full bore and allthe doors and windows open. And she still runs great it was so...
My 86 350 has a hypermax on it and I run 14psi and would trust to take it anywhere once I put a tcase in it iv had it 12 years now and really havent had any issues with it and its got a pile of miles on it
I know the feeling I weld lots and I know I post a pic and someone stupid will pop off But at the end of the day it's going to hold looks decent and I'll trust it
Lol I hate how people who dont even have welders or have ever welded or are second hand welders pop off me personally that it a good weld itllhold a lot more than ya think also a good looking weld dosent always mean it'll hold
Good trucks I have a 95 heavy half that I use to haul wood hay and just beat on I swear that old tbi 350 is about as bullet proof as they ever came mine has seen hrs of red line and neutral drops and rocking to get un stuck or someone else unstuck
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.