But a napa warranty is worth it's weight in gold when I'm stranded with a wife and 3 kids at O'Riley they want to dick me around and RA has good deals but same thing if I have to warranty anything I'm a week out and a week could mean a few grand or pissed wife
Ummmm I have several sets of peerless v bar multicam chains and at 40 mph they like to come off even with all 4 cams pulled tight and a set of bungy tensioners on them lol they pull tight enough they indent the tread of the tire
Hope you didn't jump a tooth on the timing gear but take the bolts from around the up to the cover off and disconnect the fuel lines off the injectors and the three behind the housing cover and it will slide back then come out
200k on a 12 valve it's just broke in I see 500k first gens all the time with a little blow by and thease are ranch rigs where the truck is falling apart and they idle all day at times
If the filter water seperator was leaking you'd see fuel in the valley also on the ground and Iv seen a few where the filter housing wasn't sealing at the lid usally due to not changing the o ring
Dude chains suck I got chains for everything but hate them with a passion even with the multiple cam locks and tensioner straps I try to avoid using them also in mud they work just not as good as ice or snow and slow a d steady are the trick to them or they peel to one side and cause issues
So I have a customer with a 92 f 250 that he had some hack in Washington throw a motor into last year it was running kinda poor smoking black and down on power I took a look at it an addressed a few basic issues like fuel filter and air filter it ran better but still smoked black at wot on a...
Also there are two different napa facet pumps one is only rated 1 to 4 psi and the other is 4 to 7 I'll double check those numbers tomorrow but that might be a issue for some
Thanks guys and at first I was curious about the ficm I did change the filters this morning with Moto craft filters and he needed the truck like right now so it gets a new batch o 5w40 this after noon after a slight work out of hauling logs
@Overmod thanks and I'm the one doing all the work but good news I ran it today with the scanner all checked out good the owner decided to hold off on the injectors but after a good run the smoke cleared up I took it for a 50 mile run and the smoke cleared I don't know if it just needed to heat...
So got a full set of motocraft injectors comeing they will be here Monday goin to replace all 8 injectors and do a compression test make sure all cylinders are in good shape I they are toast he just picked up 2 donor trucks and one is a 350 that's been fully deleted an bullet proofed and...
@79jasper whys that what would cause the tip to break off like that also I tryed to make sure nothing was in the cylinder but my bore scope is to big and couldn't see anything
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.