Search results

  1. ADV

    Help getting wheel studs in hub/rotor assembly

    wood might be the problem i would have put it on the concrete parking lot and let her have it with the bfh
  2. ADV

    Help getting wheel studs in hub/rotor assembly

    make sure the groves on the studs line up with the groves on the wheel hub that might help.
  3. ADV

    Help getting wheel studs in hub/rotor assembly

    get mad swing hard!!
  4. ADV

    Help getting wheel studs in hub/rotor assembly

    brass punch big hammer is all i ever needed
  5. ADV

    glowplug controllers

    I was thinking about going to a push button glow plug setup also. Is there any reason you would have to get the whole kit cant you just rewire your original controller and get a push button? I was planning on getting the white river diesel push button off of ebay.
  6. ADV

    Dana 60 lock out hubs

    Both trucks have 1 nut with a stud on it then a lock washer with holes and a flat nut to lock them together. I just finished putting them in today and it worked just wanted to know for sure. The only thing that was different i seen was the F250 with the ttb axle had a grove at the end of...
  7. ADV

    Dana 60 lock out hubs

    I know this was covered in a different post but I cant find it. I am changing the automatic locking front hubs on my 1993 f350 to a set of warn manual locking hubs I took out of my old 1988 f250. I thought I read I had to change the lock nuts but they all look the same is there something I...
  8. ADV

    starter problems ???

    I do not think you have to remove the rod but its been a while since I took one apart.
  9. ADV

    starter problems ???

    its all in the cab under the dash. the switch is attached to the clutch pedal push rod. I am going to bypass mine with a switch so i can disable my truck so it wont start. Just remember if you bypass it the cruse control will not turn off with the clutch
  10. ADV

    4 door super cab Centurion

    Give me forty acres and I'll turn this rig around It's the easiest way that I've found ... Some guys can turn it on a dime or turn it right downtown But I need forty acres to turn this rig around.
  11. ADV

    WHY?????

    I payed $272 for all 3 cables built with the military ends.
  12. ADV

    WHY?????

    I just got a set of cables from custombatterycables.com with the military ends. They are really nice I really like that I can replace the ends if necessary. You can get the ends off of amazon for around $5
  13. ADV

    Fleet charge or some other stuff

    Got mine at Fleet Farm I just noticed you are in CA. I am no help there is no Fleet Farm store that far west. I should pay more attention.
  14. ADV

    1993 7.3 IDI factory turbo engine and turbo

    paypal is the best for me. PM me and we will work out the details.
  15. ADV

    1993 7.3 IDI factory turbo engine and turbo

    Looks like shipping is going to be a little expensive so would $725 shipped work? and I will through in a banks dynofact boost gauge with gauge cup to mount it.
  16. ADV

    BANKS DynaFact gauges / trailer brake controler and more

    no body needs any truck stuff? make offer i just want to get rid of this stuff.
  17. ADV

    1993 7.3 IDI factory turbo engine and turbo

    If you need any more pictures let me know. I will put an indicator on the end shaft and measure the end play but I can not feel any.
  18. ADV

    TTB 50 Stuff wanted

    I am in WI in the Sheboygan area and have a 1988 f250 I am parting out I do not know what gears i have in it. The front axle is all there except for manual locking hubs and nuts.
  19. ADV

    1993 7.3 IDI factory turbo engine and turbo

    The truck has a zf5 and the fly wheel and clutch are still on the engine. I will have to look into shipping.
  20. ADV

    1993 7.3 IDI factory turbo engine and turbo

    the aluminum air box has FORD TURBO on it. I have a few pictures on my phone but my cable to connect it to the computer is at work I will post a few pictures in a few days. I will also look at it a bit closer to figure out what brand it is.
  21. ADV

    F/S zf5 pedals

    ZF5 pedal setup out of a 1988 f250. clutch pedal brake pedal and the aluminum bracket to mount everything. $50 shipped. I have a master and slave cylinder with the line still attached also if needed for a bit more.
  22. ADV

    1993 7.3 IDI factory turbo engine and turbo

    7.3 IDI factory turbo engine out of a 1993 f350 with 181000 miles. When I bought the truck I was told the engine had a bad cylinder but it runs and has a new injector pump and a new factory ford turbo that was put on shortly before the engine went bad. I ran the truck long enough to back...
  23. ADV

    Battery & Cable Question

    what is a group 31 battery
  24. ADV

    Fleet charge?

    I will dump it in tomorrow thanks
  25. ADV

    Fleet charge?

    So I hope to finish up my truck this weekend and I picked up some fleet charge coolant is this the same as the fleet guard? Fleet Charge Specifications No initial SCA precharge required Phosphate Free Contains nitrite for superior wet sleeve liner cavitation protection...

Latest posts

Forum statistics

Threads
93,001
Posts
1,155,992
Members
26,589
Latest member
tke395

Members online

Total: 633 (members: 4, guests: 629)

Share this page

Top