Search results

  1. pafixitman

    I really should probably buy this...

    I'm not sure he has either. If he did it would be a "Look what followed me home" post! :rotflmao
  2. pafixitman

    tires n'stuff question

    As you are learning... the second number represents the percentage of the first number to calculate the height of the tire wall. This is in millemeters. So to save you an entire math course. Current tire = 32.8" tall New tire = 31.6" tall. Shorter tire means it turns more to cover the same...
  3. pafixitman

    Suggestions for tow rig tire...

    I ran BFG when I had mine. Got them at Sam's Club. Never any issues. I have seen a lot of trucks around here with the Firestone TransForce. 121 mile / 3.5 hour round trip commute gives me plenty of time to look at crap. Michelin would always be my cost no object go to tire.
  4. pafixitman

    best way to prevent overspray inside the door jambs.

    That soft edge foam or rope tape is what they used on my dd...How do I know? because they left remnants of it on the floor, under the mats and under the seats...... Yep, I just wanted my car back and to never deal with them again.
  5. pafixitman

    Project 1997 Parts truck

    HVAC supply houses are another place to get them. Used on heat pumps and AC units to straighten fins. Not sure if there is a width difference though.
  6. pafixitman

    87 Crew Cab w/ 6 doors

    And I am guessing you now have a "lab" coat!
  7. pafixitman

    front seats

    Sadly my photos were on webshots but... I did find the post. http://www.oilburners.net/forums/showthread.php?6338-Moose-Tracks&highlight=
  8. pafixitman

    front seats

    Took the frame from the bench seat (floor mounts and slide mechanism) and had Agnem weld up a frame that bolted to it that had tabs that lined up with the "feet" of 2008 Escape leather buckets. I then bolted the new buckets to these tabs. The new fabbed bracket ran straight across the...
  9. pafixitman

    front seats

    No mufflers - this is who I got my Escape leather buckets from when I switched from bench https://www.lkqonline.com/?ref=g-ppc&gclid=CNqxlI2CrcwCFUQehgodUXwIVw
  10. pafixitman

    Truck and tractor pull & Truck dyno day

    I saw at sign at Westminster Equipment advertising this. Wont make it as much as I would like too. Got Steph talked into letting me get the kids for Saturday and told Erica she needs to be a true redneck for the day so we are headed to Arcadia Demolition Derby on Saturday.
  11. pafixitman

    noob serpentine belt question

    I recall always having to get it around the fan and shroud. But I don't recall it being that big of a deal either. Couple busted knuckles. My headache was a stripped tensioner bolt.
  12. pafixitman

    What about a day cruise to the national air and space museum ?

    What? Actually visit stuff close to me? Depending on the day etc. I would be game.
  13. pafixitman

    RV/7-Blade Round Plug Mounting

    No pic since the truck is gone, but mine was installed in front of the wheel well on the drivers side. You could actually see the back side of the plug if you looked up inside the hip so it went thru both layers. I am not sure anybody has a shallow design.
  14. pafixitman

    Painting a rear bumper

    PSA - If you go with a wire wheel, watch where you place your hands! I was cleaning up a outdoor table we got at an estate sale. Holding angle grinder with wire brush in my right hand and the table leg in my ungloved left hand last night. As I type I am looking at the bandage on my left...
  15. pafixitman

    Subways DT360 into my 94 F350

    And I thought I was saying a joke...Good for you if that is what is in the cards at this time. I never thought I would be back in payroll after getting out in 2011 but here I am for almost the last two years...
  16. pafixitman

    Subways DT360 into my 94 F350

    No more GI Joe? Back to teeth? :rotflmao
  17. pafixitman

    Ring/pinion

    EZ! Where have you been hiding? Still doing chimneys? I thought you were down by Gaithersburg. Anyway....needless to say I am back in the area (but no truck) I am on the Taneytown side of Westminster. As far as your post ... I have no idea.
  18. pafixitman

    1994 f-350 pickup truck 4wd Dually - $3250 (modesto) CA

    If I had time and money (wait, I would be dead then...) I would come out there with a 3 car wedge and bring them back across country. I should start posting what our craigslist IDI ads look like... virtually nothing or complete turds for 4500.
  19. pafixitman

    2016 MOB Oilburners IDI rally.

    You made it to Jimmy Cone for the day... Would like to see the whole family but... Erica even asked if you would be there
  20. pafixitman

    2016 MOB Oilburners IDI rally.

    Rut row! I have a lot to get done! Need weather, work, money and free time to cooperate.
  21. pafixitman

    1995 Ford F-350 7.3 DIESEL ONLY 37K ORIGINAL MILES PRISTINE DUALLY

    Congratulations in order?
  22. pafixitman

    Project Big Red

    Mike, maybe I just missed it all together but what is the actual issue? Height clearance? or firewall to intake hat clearance or...
  23. pafixitman

    whats the best way to tackle this?

    Additional support would help down the road. Guys like me harpoon lumber into a truck bed and destroy the front of beds and backs of cabs. It was obvious on mine when I installed the tool box. Once I got the box, it took the beating! Seriously though as to the best route for ya, I got...
  24. pafixitman

    whats the best way to tackle this?

    Come on Brian! You already know your answer - you just want one of us to say it so when it takes 10X's longer you have someone to blame! :rotflmao MY answer would be fix the little rust spot, slap a bed on the truck and call it good. But we all know that is not how you roll. Since you are...
  25. pafixitman

    Diesel Newbie needs some advice.

    Just my opinion... I put a Factory Tech brand valve body in mine along with a 4R100 pan. The pan is factory Ford, steel and no fins, but is 1 qt larger with drain plug. Add a cooler. I prefer the plate style. As for gauges I would not tow without a pyro and trans temp. If budget allows get...

Latest posts

Forum statistics

Threads
93,001
Posts
1,155,992
Members
26,589
Latest member
tke395

Members online

Total: 538 (members: 1, guests: 537)

Share this page

Top