Search results

  1. R

    1985 F250 6.9 short to ground

    Wiring Diagrams...may try here: https://readeverybooks.com/sg/?a=1&clickid=5e4e36d80a5df40001651425&pubid=b1770370&q=Download this Wiring Diagram I think this one is free. I have Ford Service books but would have to find and dig out.
  2. R

    1985 F250 6.9 short to ground

    Right top rear where the Yellow wires attach is where I had one of my truck's wiring overheated.
  3. R

    1985 F250 6.9 short to ground

    Disconnect the Hi/low beam switch on the floor and check for the problem. 1 thing to check if you have not done so. They tend to get moisture in them and go bad.
  4. R

    Fuel tank pickup tube

    It is easier (for me) to work on tanks with the bed off. The earlier truck like yours and mine have a brass float that eventually leaks & fills with fuel. I have seen them on the internet but I did fix both of mine in a different way. You can add a length of hose to the end of the pickup tube...
  5. R

    1985 F250 6.9 short to ground

    What problem are you having with the lights? The few trucks I have owned did not have many lighting problems other than Main light switch and hi/low switch on floor. Most grounds for lighting is usually grounded to body/frame.
  6. R

    IDIT piston pin bushing

    https://www.fordpartsgiant.com/parts-list/1994-ford-f-250-8-cyl-7-3l-diesel-turbo-5mt/piston-connecting-rod-related-parts.html?PNC=6207
  7. R

    Tachometer Add on

    Mater the tow truck
  8. R

    88 7.3 idi f250

    Not many non turbo 88 I would pay more than $15-1800 unless a lot has been updated. No offense intended.
  9. R

    Tachometer Add on

    Yes, it Automater if an Autometer-Flame Thr
  10. R

    91' f350 fuel tank issues.

    I just got a couple of friends & we lifted the bed off. Worked on other things while it was off
  11. R

    Timing the 6.9 with a lumi probe.

    Send a PM to: Contact: PM or email bbjordan400 at yahoo.com Capability: Pulse or Luminosity Equipment: Ferret timing adapter, Fox Valley 160 timing adapter, adjustable timing light I have the Rotunda, not the Fox. I'm not sure with way you would need to turn the pump for that one.
  12. R

    Timing the 6.9 with a lumi probe.

    Do you have a variable offset timing light? Timing light with dial at rear that shows degrees.
  13. R

    Timing the 6.9 with a lumi probe.

    Which timing meter do you have? Rotunda, Kent-Moore, etc.?
  14. R

    Having reverse light issues

    I will wait until the rain stops and look under mine to see which color wire I selected on my '86.
  15. R

    C5N

    Try this VIN decoder: https://www.ford-trucks.com/forums/vindecoder.php?
  16. R

    Having reverse light issues

    Same location as mine. Use a relay anyway. Short may be in your new lighting setup since it was working fine before them. Switch is on driver's side of your C6.
  17. R

    My 1985 F350 Lifted CC diesel dually build

    Drill them with smaller bit about 1/16 smaller than original x 1/4 deep and it should punch out w/o oversizing hole
  18. R

    6.9 idi head bolt washers

    If you know the dimensions of the washers, you can check McMaster-Carr online.
  19. R

    7.3 idi no start/bad noises after reinstalling injector pump

    Which glow plugs are you using? Hopefully Motorcraft/Beru
  20. R

    Nozzle availability

    OP may want to purchase from DCP here in Memphis, he MAY get lucky bot I doubt it. I could drive over and buy,swap,return since I am closer than most. Ain't gonna happen. There are lots of 'endeavors' around here that supports families/generates profits. Hopefully the law will catch up with...
  21. R

    Having reverse light issues

    Check your backup light sockets for bad bulbs grounding & corrosion..
  22. R

    valve stem seals and oil consumption

    Kano has some good industrial products & you can purchase straight from the manufacturer in Nashville if you are a 'business'. They will send you discounts about once a month.
  23. R

    Howes lubricator / Diesel Treat

    Run Hot Shots in mine also. Tried the 2 stroke oil years back w/o improvement but no Hot Shots then.
  24. R

    Bad Injector - How to Locate?

    Easiest way I've found for checking injectors is, as Wes suggested in other threads, using a laser digital thermometer and shoot injector lines at injectors seeing which injector is running substantially cooler than the others. Then check out suspected injector further or compression of all...
  25. R

    valve stem seals and oil consumption

    Time for a re-ring. I tried the seals w/o any change to oil usage. Cylinders still had cross hatching so I just ball honed. Worked great after that with no oil loss. I replaced all bearings except cam, used bore scope ad they 'looked' good. Did replace pistons, bushings, lifters & pushrods...

Latest posts

Forum statistics

Threads
92,997
Posts
1,155,955
Members
26,579
Latest member
truckonfire

Members online

No members online now.
Total: 1,307 (members: 1, guests: 1,306)

Share this page

Top