Search results

  1. R

    Loss of power during acceleration

    Replace the 'olives' on that leaking feed line if you have not. Does not have compression fittings on it.
  2. R

    Injection Pump Problem?

    Running in a PS is different than running in an IDI. PS does not have the injection pump. I ran 55gal of jetA in my 6.9 with problems later on. I also added 2 stroke oil, 10-40w oil, DieselKleen, etc but didn't help. My nephew worked at Mountain Air and had some take-out fuel also and gave...
  3. R

    1986 F350 IDI brake issue (among other thing but lets start with what could kill me first)

    What kind of shape are your calipers in since you had the problem before replacing those parts?
  4. R

    Help with identifying A/C compressor

    That is a FS6 compressor. One from an 86 will fit. I've had no luck with 4 Seasons rebuilds. I have the GDP new unit on mine & works very well over the past 2 years. Rockauto
  5. R

    6.9 idi missing, puffs of white smoke

    Maybe I misunderstood. If it was running, I would NOT mess with tightening the rocker arms. I would change the valve cover gaskets if you are going to remove the covers.
  6. R

    6.9idi head retorqueing.

    torque rockers to 20ft lbs
  7. R

    Anyone running Jet A with stanadyne mixed in on their 6.9

    I had 55 gallons of Jet A also drained & unable to be reused. Was just to dry like kerosene & had to add WMO to run right in my 6.9. It was free but I didn't use anymore.
  8. R

    Tools and Spare Parts

    I don't carry much. Starter, Vacuum pump, belts, 12v air compressor, tire plugging kit & tool kit. Most other break downs are towable. Plenty of parts at home. If long trip, I just rent. If it breaks down, they can bring me a replacement. Almost forgot, can of Super Whoose if glowplugs fail;)
  9. R

    Cheapish 8cyl p pump

    Not on an Ford/International 6.9 IDI
  10. R

    radiator cap

    Myself and a few here use a 7# Stant cap.
  11. R

    PSA on CDD Phone Line

    Praying for your recovery Wes! Been there with the walking pneumonia. In & out of the heat and A/C will get to you fast
  12. R

    Bumper tow?

    Keep as close to frame horns as possible
  13. R

    Promise... the build

    Glad to hear you are -doing better-:Thumbs Up:fight::fight:
  14. R

    no start issue can anyone help

    You will need to replace the o-rings in the oil cooler (what is leaking)
  15. R

    Still in nee of help

    My 1st time did just as yours. Thought the starter had a problem. Was parked at an angle & cowl seal was toast. Water got in the intake past the rubber seal on the air intake. etc, etc ,etc. Starter has a lot of torque on that flywheel and bent 1 rod. I went ahead & honed + re-ringed &...
  16. R

    Project Little Foot

    Good time also to replace that original muffler, etc. Walker has a full flow that does not have the chambered sound deadening but still sounds decent. That one is probably loaded with soot as mine was. Can go from original to 3" easily with the bed off.
  17. R

    Voltage regulator?

    Will be praying for you Bro :rock:
  18. R

    Ac compressor clutch cuts off

    Low on freon as franklin2 says. Low side too low, high side too low also. Low should be between 32-40psi & high around 250psi. Buy a cheap digital thermometer and keep in center vents to keep an eye on cooling. About $8
  19. R

    Still in nee of help

    Not having the same compression as other cylinders. Have you had a lot of rain & what condition is the cowl seal at rear of hood where the hood meets the cab?
  20. R

    Still in nee of help

    Bent rod probably. Have the same problem with all this rain. 2nd time around with good cowl seal. Water gets in the regular air filter & had a flat cover over it this time. It gets a turbo installed this time around.
  21. R

    torque spec for water pump pulley bolts

    14lbs torque on water pump to front plate fasteners(19Nm). 4 bolts to seal with pipe thread sealant. Also cut a piece of cardboard to fit the radiator on the inside. Keeps fan from damaging radiator if it falls during removal or installation of fan if radiator is still installed.
  22. R

    Couple of 6.9 issues

    Could also be picking up some water in the fuel.
  23. R

    Haynes Techbook Diesel manual online, borrow for free online

    This is some Ford manual pdf files for help. Me and others have scanned parts of our manuals in the past. http://www.thedieselfiles.com/
  24. R

    Well, ain’t that pretty

    Oh yes, That is Nice;)
  25. R

    Turning over 6.9 by hand

    Excuse me. He did say glowplugs pulled. No hydrolock

Latest posts

Forum statistics

Threads
92,996
Posts
1,155,953
Members
26,579
Latest member
truckonfire

Members online

No members online now.
Total: 1,555 (members: 0, guests: 1,555)

Share this page

Top