Search results

  1. 1mouse3

    Clutch pedal bracket crack

    If you now how to make a mold, you can send it to a person like this to get a one off part cast. https://windyhillfoundry.com/
  2. 1mouse3

    A fork in the road, impeding progress

    A pressent from santa finally came in, and now have a valid replacement.
  3. 1mouse3

    parallel turbos

    I put a bunch of clamps on the snake to hold it in place... I got a leadd on someone to try, so all got ready to go on a ride and will see what I get. This what I came up with for this and went to get welded as well.
  4. 1mouse3

    parallel turbos

    He trys to brute force it, the out come is a bubbly mess on the outside with mig and with stick there is a molten mess that might work. It takes me a bit to adjust to change in light, my line ends up off the line and would ranther not have to wait to see whats around me.
  5. 1mouse3

    parallel turbos

    No there was no good deal, dont now anyone working at a muffler shop anymore. Im not sure who could be viable, a lot around are not good with the tools they have. Im right now trying to figure out who is do welding, choice is a blind man or someone only good at stick but only has mig.
  6. 1mouse3

    parallel turbos

    I made a new bit off the piece off the turbo... So the drive side down pipe is mocked up... Same for the snake I came up with as one for the passenger side... Both sides have a disconnect pont down at this point... So this rapes up all that is need for exhaust, it just...
  7. 1mouse3

    parallel turbos

    Yes, and perferbly good ones. Also the pipe needs a rib to keep from sliding off, Im going to try wirh cable crimps and washers.
  8. 1mouse3

    parallel turbos

    There reinforced silicone hose, that I got from frozenboost.
  9. 1mouse3

    parallel turbos

    I have gotten the engine dressed up.. Then the core gets fitted up with missing pics, like of the dual SHO fans tied up with some bailing wire... The passenger side turbo, want to fight with space for the inercooler pipe... So flipped it, so it can be ran to someone to make...
  10. 1mouse3

    parallel turbos

    For several days and many days ago, I started with trying to fight with the transmision. I found out too late the tcase was in nutral, so rocking the engine around did not get the clutch alined. So doing all this was in vain, since got a odd pop... So had to dismantle the trap... This...
  11. 1mouse3

    A fork in the road, impeding progress

    Well the lux cluctch kit I installed 10 years ago and only put about 20k mile on it a few years ago, had a throw out bearing get a bit rowdy... That tore up the fork a fair bit, to the point of not being viable to send... Found one I thought had a matching part number, ended up...
  12. 1mouse3

    So what did you do with your truck today?

    Try a ride from ga to mo with two half siamese kittens, that were free from my grandma.
  13. 1mouse3

    parallel turbos

    There is progress... With placement of the turbos give enough room for exhaust pipes... And there is room for a charge pipe on the driver side.
  14. 1mouse3

    So what did you do with your truck today?

    Old girl got a replacement heart but not fully set in place, I was frozzen by this point and was fighting to get it this far. It almost lined up with treaded rods but need to figgit with it some to get it to fall in the rest of the way.
  15. 1mouse3

    So what did you do with your truck today?

    Dont fret, things are getting done and will post when I get ime to think about what I have done.
  16. 1mouse3

    So what did you do with your truck today?

    A bobcat with a pokey bit... Got the old heart... Out of old girl, that left a hole to be pluged with the other one... The other one has been dressed, turbos oiled, lifters oiled and readied to fire. Just going to need a new clutch fork and bearing before it can go in.
  17. 1mouse3

    She swallowed a glow plug

    I know the 60g is and would assume the same for the bosch being self limiting, since are both for the 6.2/6.5. Yes some had to be "turned" on the 60g nut to get it seated, but looks like the bosch come pre turned. I have tested my 60g to work for 30 sec + before install for function, part new...
  18. 1mouse3

    She swallowed a glow plug

    Your right that something is up with that one, the hex is made such that it should work.
  19. 1mouse3

    She swallowed a glow plug

    The ac 60g plug I have are 1-7/64, for the tip on the glow plug. Im not sure on there being just fine, well for the ones Im using have different sized. The nut part would bottom on the head first, before the bottom seat mate up. I was getting carbon or soot up the threads, that make it...
  20. 1mouse3

    I Bought These Wire Connectors for Engine Harness

    I have set up my gauge display with a different brand that looks like that, this is what I made for half and this is 16ga. This the crimper a I used... crimper This the parts I used and come in A to E key. male plug female blukhead female plug male pins female pins
  21. 1mouse3

    She swallowed a glow plug

    Thanks, and the taper will not be there since drilled them to fit 60g plug but could still work. There is also the option of self limiting 60g plug off a 6.5, there shorter so something needs done. I had them on my 6.9 and had no issues running them manual for 10-15 seconds, I ground down...
  22. 1mouse3

    She swallowed a glow plug

    Thats for the part number, they might work out better than what I came up with. How well do you think that o-ring will hold up? A grid heater can be made to work...
  23. 1mouse3

    slipping into insanity

    She got put away wet, after being rode hard to get her back from a run. Was having issues with a lifter not wanting to work, cleaned it and it failed again. So it was sent without a intake push rod, keeping the rpm below 2800 rpm. Well need it back for short runs, so speced the give in the...
  24. 1mouse3

    A third hand for the brakes

    That leak lock has favorably specs, so should be skookum. https://www.supplyhouse.com/Supco-HS10002-Highside-Leak-Lock-Pipe-Joint-Sealant-Tube-1-oz
  25. 1mouse3

    A third hand for the brakes

    Im not sure on the validity of there being a issue, but doing so would better my driving. Heal/toe and knowing the engaement point of clutch, along with the art of wiping a wheel is how I was taught to drive a manual. Say this video as example, I would use the line lock coming up to this...

Latest posts

Forum statistics

Threads
92,996
Posts
1,155,944
Members
26,577
Latest member
Jrlew87

Members online

Total: 1,390 (members: 7, guests: 1,383)

Share this page

Top