Search results

  1. S

    Rockauto "out of business"?

    I just browsed below: https://www.oilburners.net/categories/oilburners-net-supporting-vendors.142/ to search for the latest Rockauto discount code and - for whatever reason - I can't find them anymore. What has happened?
  2. S

    PA Biodiesel Supply

    Thanks for your explanation. Sometimes I run into trouble opening the "cover" of my bowl. Maybe I am just too careful or inexperienced because the bowl can load so much, that I simply don't need to clean it so often...
  3. S

    PA Biodiesel Supply

    Great! What is a fixed C-Shape design? Nice to read that others share similar PA Biodiesel experiences. In today`s world - it is not usual anymore to have such fast response.
  4. S

    PA Biodiesel Supply

    I contacted PA Biodiesel Supply directly regarding upper questions. And, Surprise - Surprise, the response time was incredible fast. Not only that I know now what I need, but they also shared "how to do it". Both saves time and effort. Great - outstanding - support! BTW: PA also added the Gs...
  5. S

    Centrifuges- oil pressure type vs motor driven

    I have. I am using a PA Biodiesel Supply UFC next to a pump driven "inverter" centrifuge. Setup: Both devices are feeded with the same transferpump from the same barrel parallel to each other. Tech: The "Upside Down Centrifuge" is said to be the better pump driven centrifuge. The...
  6. S

    PA Biodiesel Supply

    I am running a Ultimate Force Oil Centrifuge and the ball bearing(s) of the motor are showing signs of wear. Did anyone replace the bearings on this motor? Which ball bearings (model type) are mounted? What is Motor Shaft Seal type? How to remove the "bowl cone" from the motor axle? Thanks!
  7. S

    Special designed WVO-Glow-Plugs for 7.3idi - available soon

    Yes, the size is restricted. I'll take pictures once I received them. And yes, First I'll install them in my van - to hopefully experience changes in the performance - before I would considering shipping them to any other 7.3idi driver.
  8. S

    Dana 60 rear hub spare parts

    Thanks! Why do we need to find this info on a different website and with another company? I would expect, that the manufacturer is keeping his data updated for his products. dennysdriveshaft.com says that it is "Exploded View Diagram Number 32" In our X510-9 pdf it is number 34. Does anyone...
  9. S

    Wmo and IP timing

    You have to find your way. In Australia, your weather/climate is different than here in Finland. What is good here and working for me, may not be necessarily working for you. Just remember: - IP needs cooling and lubrication. - Alternative fuel needs a higher "working" temperature to reach a...
  10. S

    Wmo and IP timing

    Install a valve infront or after the heat exchanger. Doesn't matter if magnetic or not. Magnetic is more convenient. During winter time or during warming up period, you can let the exchanger do his job. During the summer time or after warm up, you just close the valve. But you need a fuel...
  11. S

    Wmo and IP timing

    In case you have an Navistar IDI: https://www.oilburners.net/threads/7-3idi-wvo-ip-timing.91443 You need to play for some time to find your setup. And this setup you may need to adapt to the outside weather. With a 2-tank system you may have it a bit easier. But it also depends on the outside...
  12. S

    One rear brake locks up

    Yep. It may work with warm/pre-heated WMO. But I don't want to clean the burning chamber every spring time... WVO needs 160°C that it may start burning. This "multi-oil" burner may not even reach that temperature :D
  13. S

    Timing Probe Fitment Problem

    Yes. We used the drill only (can't remember how many mm - and no machine) and moved it by hand in and out for quiet some time. The drill was used as a file/rasp. Luckily it wasn't raining... Yes, it was effort.
  14. S

    Timing Probe Fitment Problem

    The bracket hole on my engine was rusty. We used a drill and removed the rust. Took some time. Then the sensor fitted in - w/o any further modification. Your thread reminds me, to open the bracket again and to fill it with grease.
  15. S

    Coolant filter mounting bracket now available.

    Good idea! What about following options: - to locate the filter holder @ a low point @ the vehicle. On this way, heavy stuff will find the lowest point in the filter and not in a radiator or pipe. - before the filter head and after the filter head on each side a valve, so you can close the...
  16. S

    One rear brake locks up

    Thanks for your motivating words and explanation. Last year I bought a dutch military multi-oil burner. @ least it was advertised as such. But it doesn't work with WVO but only with low viscosity liquids. And I don't want to test it with WMO, as I don't want to clean the burning chamber after...
  17. S

    One rear brake locks up

    Thanks! It made "click" in my head and I got it now! Since one of the wheels is locking up when breaking, means, that the R-ABS is out of function. Now I have to address this problem - whenever I have patience to do it. And another Thanks! :)
  18. S

    7.3idi: WVO and glow plugs

    Sadly, I can not share your experience. That's why this is now happening: https://www.oilburners.net/threads/special-designed-wvo-glow-plugs-for-7-3idi.92160/
  19. S

    Special designed WVO-Glow-Plugs for 7.3idi - available soon

    Relating to my thread here: https://www.oilburners.net/threads/7-3idi-wvo-and-glow-plugs.91408/ During March/April I will expect a shipment of especially designed glow plugs for the 7.3idi engines. - I have to order this weekend to make the schedule happen. Idea is to bring the starting...
  20. S

    One rear brake locks up

    I need to dig a bit more about this RABS. I have no clue why it is called Rear - ABS if it isn't an ABS. And if it doesn't do any "traction control" then why is it even installed for?
  21. S

    Dana 60 rear hub spare parts

    Thanks. I opened the site and with it I got here: https://www.danaaftermarket.com/ Thanks. I found the document. With the doc I found the seal on page 176 position 34 in the drawing. Using the BOM 605639-1 and going on page 187, I get the part number "46004". When I now search for this number...
  22. S

    Jesus Freak's WMO tow truck

    Hi JF. Do you think you could find time to do some rust work on your truck? I was browsing through your pictures and when seeing the rust on the frame, then it's hurting. It will eat your truck. I don't know why FORD is not putting more effort into rust prevention. My kids said that f-o-r-d is...
  23. S

    One rear brake locks up

    Hi @ all. I had the vehicle inspection this week and things went well. BUT I still need to fix this problem. Now I have to prepare the fix and to get the spares: https://www.oilburners.net/threads/dana-60-rear-hub-spare-parts.92016/ Regarding "heating the environment": I may be too cheap to do...
  24. S

    Dana 60 rear hub spare parts

    Hi @ all. Does anyone have an overview with spare part numbers for Dana 60 rear hubs? I have the Ford Service Manual for my van but the part numbers listed there, are not much of a help. I have to replace the inner shaft seal of the hub...
  25. S

    One rear brake locks up

    Thanks JPM4 for your support. I made a coffee, shoveled the snow in the yard around the van away, pushed the garage jack under the axle and lifted it - so I could pull the right drum. Then a surprise - but I don't know if this is the cause of the locking brake: It seems that a/the (radial...

Latest posts

Forum statistics

Threads
92,996
Posts
1,155,941
Members
26,574
Latest member
abcdefg

Members online

Total: 1,659 (members: 8, guests: 1,651)

Share this page

Top