Search results

  1. BlindAmbition

    Rebuild or replace motor? New project - 1985 F-250 4x4 6.9 with Banks, T19, and GVOD.

    Picked this new truck up even though I need another project like I need a hole in my head. Cleanest truck I've seen in a while, couldn't pass up the price. The dash isn't even cracked and the paperwork is current. Has a 6.9, older Banks turbo, a T19, GVOD attached to the BW1345 transfer case...
  2. BlindAmbition

    Gear Vendors for ZF5/C6/E4OD

    Gear Vendors unit for a 4X4 pattern C6, ZF5, or E4OD. Fits between transfer case and transmission. Or can be used with a driveline parking brake for 2wd. Just the GVOD, no electronics. Has a deep sump for extra fluid capacity. $1500 for GVOD $1800 with a driveline parking brake 93551 zip...
  3. BlindAmbition

    Diesel pattern ZF5 S5-42 - two available, one 4x4, one 2wd

    $800 each for forum members, I usually get 1200 for these. SoCal prices, I know you Midwest folks get them for less.
  4. BlindAmbition

    IDI turbo setups - three available

    I take Zelle or cash in person, willing to ship on your dime ATS 088 - $900 Hypermax - $1000 ATS 088 No air filter - $800
  5. BlindAmbition

    Free misc parts, you pay shipping - pulleys, coolant elbows, pump gear, 6.9 valve springs

    Serpentine and V-belt pulleys, coolant elbows, timing gear, 6.9 valve springs - Free, you pay shipping.
  6. BlindAmbition

    Bullnose Instrument Cluster bezel

    Decent bezel from my 86 F-250 bullnose. $80 plus shipping
  7. BlindAmbition

    ATS 093/Ford factory turbo snail

    I have an intake snail for a factory turbo or ATS 093 setup. $150 shipped to your doorstep. No picture tonight, will add in the am.
  8. BlindAmbition

    ATS 088 Turbo setup

    ATS 088 turbo setup for sale. Turbo has play, needs rebuild. Includes the intake snail, crossover pipe, up pipe setup, turbo itself, and the downpipe for exhaust Located near zip 93551. $700, can ship on your dime
  9. BlindAmbition

    Injection line sets

    I've got many sets of IDI injection lines. Message me with what you need, whole sets or individual lines
  10. BlindAmbition

    Bullnose IDI Tachometer

    $80 shipped
  11. BlindAmbition

    Saginaw pump bracket

    Saginaw power steering pump bracket for a V-belt IDI. $120 including shipping. Comes with the bolts and the spacer as well, not all bolts shown in photo.
  12. BlindAmbition

    IDI York Compressor mount

    $150, shipping included. York AC Compressor mount for an IDI. Best picture I can find of it installed from this thread by towcat.
  13. BlindAmbition

    Harmonic Balancer differences between 6.9 and 7.3 NA

    I have a 6.9 engine with a harmonic balancer that doesn't seem correct. The pulley doesn't sit evenly on it and the timing mark doesn't line up at 0 degrees despite the timing gears being set correctly. I've got a harmonic balancer from a newer truck, unsure of what year, but it had a...
  14. BlindAmbition

    F-Superduty hydroboost

    I've got an F-Superduty hydroboost unit for sale with all the hoses. $220 shipped to your door I also have 3 hydroboost units without the master cylinder/reservoir that I can do for $150 shipped. If I can rustle up any hoses on those I'll toss them in. I know I've got 1-3 hydroboost to...
  15. BlindAmbition

    CDRs - Glow Plug controllers - climate - cruise - steering pump/bracket - etc $20/ea

    $20 each plus the ride 4 CDRs, all test fine 3 7.3 style GP controllers PS brackets, one with a pump Fuel filter head and bracket C6 vacuum style cruise control Cable operated climate control 4 VRV units, 3 pictured Air filter housing Can accept Zelle payments, or meet in person if you happen...
  16. BlindAmbition

    Valve Stem Seals

    For a 6.9 motor, what are the best valve stem seals to use? I see threads saying to just put intake seals on the exhaust, I see others saying that ruins valves and to use the umbrella style. I've searched threads on here and FTE, and found more differing opinions than I have toes regarding...
  17. BlindAmbition

    80cc IDIPerformance pumps in stock

    Been checking for pumps everyday for about 3 months now, just saw them in stock and got one. Two 80cc pumps left. https://idiperformance.com/shop/uncategorized/rd2-80-injection-pump/ Also 5 of the 80cc NA pumps https://idiperformance.com/shop/uncategorized/rd2-hpna-injection-pump/
  18. BlindAmbition

    Useful PDFs

    Here is a link to some useful PDFs I've collected over the years https://drive.proton.me/urls/P4FWE9PCF4#kscneh8L7gjm
  19. BlindAmbition

    GearVendors behind ZF5 4x4 - Anyone done it and care to share their setup?

    I picked up a GV unit for $350 meant for an E4OD equipped RV with a driveline brake. Bolts right to my transfer case, seems like it'll bolt right to my ZF5 4x4 transmission as well. The issue with this particular setup is the transfer case shifter linkage mounting, I'll need to figure that...
  20. BlindAmbition

    2WD Super Duty front brakes to match 10.5 rear axle swap wheel pattern - easy or complicated?

    I have a 1986 2WD F-250 SRW. I am planning on doing a Sterling 10.5 swap in the rear to get disc brakes with a parking brake. The wheel pattern changes, I can either drill it out or change the front to match. I have a line on some 17" Eagle Alloys in 8x170 that I could put on the truck, or I...
  21. BlindAmbition

    Parts for sale - Gearvendors for C6, Banks Sidewinder, Saginaw pump brackets, etc

    Early Gearvendors unit with C6 tailhousing. Doesn't say Gearvendors on the actual unit, however I sent pictures in to the gentleman that runs https://www.maximum-overdrive.com/ and he told me it looks like an early unit. It definitely wouldn't fit a Volvo where Laycock ODs usually come from...
  22. BlindAmbition

    WMO pressure centrifuge using Spinner II 60SE - general thoughts?

    So I picked up 5 Spinner II Model 60SE (120 gallons per hour I believe) pressure driven centrifuges for a song and would like to utilize several of them for processing WMO. Any tips on how to best do this? I posted a couple of videos showing the basic setup I'd like to try for, I figured I'd...
  23. BlindAmbition

    IDI swapped 1973 International 1210

    Which of you is selling this? Pretty sweet project https://www.facebook.com/marketplace/item/563284975728624/?ref=search&referral_code=null&referral_story_type=post&tracking=browse_serp%3A4d40fedb-f322-4043-8130-77379818d2f0
  24. BlindAmbition

    72 Highboy swapped IDI on Deboss Garage

    Which of you did this?
  25. BlindAmbition

    SoCal/Las Vegas - Factory Turbo Setup

    IDI Factory Turbo setup in good shape, complete with hardware, oil feed, crossover pipe, and exhaust pipe. Closest zip is 93551, headed to Vegas on Thursday and can bring it with me if anyone near there wants it. $900

Latest posts

Forum statistics

Threads
92,996
Posts
1,155,941
Members
26,575
Latest member
Gerhard

Members online

Total: 1,677 (members: 3, guests: 1,674)

Share this page

Top