Search results

  1. frankenwrench

    Project Big Blue

    Cam to crank 180 out. RAN IT FOR OVER A YEAR LIKE THAT. Wondered why every piston skirt melted away from wristpin and I used around 5 gallons of oil a day. Best that dumb one..... Il wait.
  2. frankenwrench

    Show us your IP wrench!

    Pm? I'd love to not fight those nuts each time I adjust the ip or remove
  3. frankenwrench

    ZF-5 transmission not engaging

    Too bad all u guys aren't down here. I find the bw 1356 left and right out here in working condition for 50-125 bucks all day long. Alot of these guys go 2 wd and slam their trucks and have no use for them. I don't like the look or lack of use for intended purpose, but not my truck so who cares...
  4. frankenwrench

    ZF-5 transmission not engaging

    The be 1356 I have with the zf tranny the mount is still on the transmission tail housing So just as franklin2 said, remove driveshafts, remove linkage, remove speedo cable/plug, remove bolts, pull t case. But it does weigh a bit so a heavy armed friend or two is great to have wen your under...
  5. frankenwrench

    Key won't shut off engine

    Lol. Maybe. But it's better than stalling it every time I want it to turn off. Or pulling that spade off the ip. But I am sure stumped on my tach not working now wen it worked wonderfully before. Pulled the plug and cleaned it off and even inspected the wires were they go into the plug and they...
  6. frankenwrench

    Key won't shut off engine

    Wrong nitch, not the other previously mentioned. Auto correct just made my language bad for me! Lol. Not that I wasn't thinking it, just didn't mean to say it. Bout to throw in the towel as far as being timed perfectly, and tach working, but may make that @Thewespaul problem:sorry:. I'm sure wen...
  7. frankenwrench

    Key won't shut off engine

    Well I finally got it to start but now I have no tach. may have to play with timing cuz it does sound like it's missing and I've let all the air out of the lines. Turns out I was looking at the wrong bitch out of all of the ones that have been made. Lol. Didn't fix the tach after adjustment, but...
  8. frankenwrench

    Key won't shut off engine

    Well I'll be a sob... Everything works now! Tickled phukin pink! The gp relay doesn't do that whine thing it used to but I can feel it click on and off. Wait to start light only stays on for like 5-7 seconds now, none of the wires are getting hot, but for shits and gigs I want to pull the bullet...
  9. frankenwrench

    Key won't shut off engine

    Ok so I found my main ground from battery to block not only loose, but trashed with a lovely mix of the white green powdery shit mixed with black tar from a previous oil leak. Replaced it as well as the smaller wire from block to frame. Got 6 foot of 4 guage wire to run in place of the yellow...
  10. frankenwrench

    Key won't shut off engine

    I'm not sure what u mean
  11. frankenwrench

    Key won't shut off engine

    I tried this just a minute ago. Lol. Still made one of the two thicker yellow wires start smoldering on the new harness as soon as I mashed the button. But not wen I release it? I'm a bit stumped. Replaced the harness from the firewall forward(which getting the large round plug to let loose was...
  12. frankenwrench

    Key won't shut off engine

    Still doing the same bs so I disconected the white wire from the gp relay and I can now turn the key on without the wires heating up. Looks like I'm stuck using the block heater.
  13. frankenwrench

    Key won't shut off engine

    So far found for loose grounds:wtf: and the best part is is the ground coming off of the starter was also loose but never had a problem engaging the starter not sure why or if this even relates but either way not good. The gauge cluster turns off with the key now but still tries to heat up the...
  14. frankenwrench

    Oil pressure documentation

    Not to hijack thread, but alot of pple run a t on the stock sending unit at the very back of the block to plumb the mechanical guage as well as not have a dead stock guage. I just ripped my stock sender out and plumbed directly to the original senders location. Wen I installed turbo, had to...
  15. frankenwrench

    Preorder Opportunity for CDD Intercooler Kits and 3" Downpipe Kits

    And that's a shame, in my opinion the bull noses are the best looking just before obs. And yet I own bricknoses. Lol. Really happy that you are addressing the bullnose intercooler situation though.
  16. frankenwrench

    Key won't shut off engine

    Well new harness installed, had to pull pump to get it all out as well as replace the injection line that we found was cracked and seeping fuel next to the filter housing. Went ahead and replaced it with a line from a van to be rid of that timing adapter I always have to fight with. Turned the...
  17. frankenwrench

    White/Blue Smoke with oily fuel in exhaust pipe

    There is a shaft that runs through the large gear on one side and to the roter in the ip itself. If that seal is worn or bad it is possible to leak fuel into your crank case. Also, I tried the method of loosening each line to see if one of my injectors were bad and had the same results you did...
  18. frankenwrench

    Glow plug data

    Here's a two month old diesel rx. This set never seen starting aid of any kind. As they themselves were supposed to be THE starting aid.
  19. frankenwrench

    Glow plug data

    The glow plugs I just replaced in my truck are 4 years old and we're transfered between 3 different engines, used WITH ether, also used with b12, gas on a rag, wd40, and a few times with a propane torch in the intake just releasing the gas with the glow plugs cycling and still worked wen I...
  20. frankenwrench

    Glow plug data

    Ugh. I dislike AUTOLIGHTS greatly, but would use them swelling things before ever touching a diesel rx again. Those things don't just blow off the tip, they blow off at the base! Had that happen to all 8 in my truck, same with my sisters truck, and the 6.9 I had in my truck prior to the 7.3...
  21. frankenwrench

    Key won't shut off engine

    I have a thing against those.... NOT a slushbox fan of any make or model. :puke:
  22. frankenwrench

    Key won't shut off engine

    Only wiring harness I could find was out of an automatic. Any special thing I will have to do to make this work?
  23. frankenwrench

    Need more power!!!!

    Actually, yes. He in fact does have almost anything u need!
  24. frankenwrench

    Key won't shut off engine

    Anyone got a complete wiring harness for a brick nose?
  25. frankenwrench

    New Walmart SuperTech diesel coolant

    I've heard of this as well

Latest posts

Forum statistics

Threads
92,996
Posts
1,155,943
Members
26,575
Latest member
Gerhard

Members online

Total: 1,642 (members: 8, guests: 1,634)

Share this page

Top