Search results

  1. austin92

    Coolant Leak from GP controller

    Double checked, gpc is definitely 1/2 npt Sent from my iPhone using Tapatalk
  2. austin92

    7.3 idi coolant issues

    My first thought was rad cap also Sent from my iPhone using Tapatalk
  3. austin92

    Coolant Leak from GP controller

    I will check for sure when I get home after work this morning. I have a controller on the shelf and a mountain of pipe fittings I can test it in. Harbor freight has a pipe nipple specific extractor set that would probably work well for you. I think it’s 10$ and covers 1/8 through 1” Sent from...
  4. austin92

    Suspension choices with pros and cons

    Where I park at home I can do a single point turn around in my 2wd and it takes a 2 point turn to get the dana 50 turned around. Coming from a 2wd, the first time I drove the dana 50 truck I got out and looked under the front end to make sure something wasn’t binding. It’s bad... lol the only...
  5. austin92

    Gooseneck towing mirror glass removal

    So these mirrors On this bracket ? Sent from my iPhone using Tapatalk
  6. austin92

    7.3t Oil Leak, #7 Injector Return Line Won't Seal..?

    I could tell when it snapped down into place, just kept leaking. Washer trick has lasted about 3000 miles so far though. I used wheel bearing grease each time Sent from my iPhone using Tapatalk
  7. austin92

    Obliterated a deer..

    I hit 3 in my old jeep Comanche. Cracked the turn signal lens, fiberglass between grill and hood, and grill. That truck took so much abuse and just kept running. Sold it with 480k miles just for the motor. Body was shot. Sent from my iPhone using Tapatalk
  8. austin92

    Batteries load tested ok but voltage dropping

    I did A LOT of research and comparing when I needed a set of batteries. I always loved the yellow top in my jeep so when I first got my 83 I made an uniformed decision and bought a set of red tops. I think they were 700cca... yes they started the truck but didn’t have the reserve capacity and I...
  9. austin92

    Gooseneck towing mirror glass removal

    I have a broken mirror I could take a look at/take pictures of if you want. Where did you get those mirrors? I like them Sent from my iPhone using Tapatalk
  10. austin92

    7.3t Oil Leak, #7 Injector Return Line Won't Seal..?

    I fought a return line leak on #7 for a while after I put in new injectors and IP. Tried new o rings 3 times before I got it. I ended up doing what my buddy recommended. He had problems sealing #8 on his r&d rails so he put a washer over the injector threads, on top of the rail before he...
  11. austin92

    1966 IH Travelette 1 Ton New Member

    Sweet looking truck. What does something like that sell for? Sent from my iPhone using Tapatalk
  12. austin92

    Found this old dude

    My truck has dash vents, ac controls in not under the dash with the heat controls, short wide radiator, and standard output heater core. None of that seams like a standard combination. Maybe my truck is just an example of how you could order what ever you wanted back then, no “packages”. My...
  13. austin92

    Found this old dude

    83 Sent from my iPhone using Tapatalk
  14. austin92

    Found this old dude

    My truck had ac and a wide radiator. Is that where the optional part came in? Sent from my iPhone using Tapatalk
  15. austin92

    Found this old dude

    Were the wide radiators ever standard and are there years you couldn’t get them? Sent from my iPhone using Tapatalk
  16. austin92

    AUTOENGINUITY SCAN TOOL for PSD's

    He passed away September this year Sent from my iPhone using Tapatalk
  17. austin92

    Interest in gauge pods for bulls and bricks?

    How much you think they’ll be? Sent from my iPhone using Tapatalk
  18. austin92

    Rough start when cold?

    Mine are the zd-1a’s blade style. I’d like to get a 6.0 harness and swap to zd9’s but time and money lol Sent from my iPhone using Tapatalk
  19. austin92

    Rough start when cold?

    Yes, lots of white smoke, facet duralift intstalled. No fuel leaks before the IP I was getting 8-10 seconds glow time, listening to the relay, not watching wts light No, I typed the correct numbers. I read 3-8 ohms is good. Did they mean .3-.8? Still doesn’t make sense, plugs are less than a...
  20. austin92

    Red bucket seats from a 1994 XLT extended cab $150

    They went in an 87 cclb dually Sent from my iPhone using Tapatalk
  21. austin92

    Rough start when cold?

    I’m stumped on my truck too man. Only thing I’ve changed since last winter is R&D IP and injectors (8.5* timing) and it’s taking 15 seconds of cranking to fire. No return line leaks. Last summer I installed a new gp relay, motorcraft plugs, powermaster starter, and pair of new Napa legend group...
  22. austin92

    6.9 idi wont fire

    Bad glow plugs could probably cause white smoke while cranking Sent from my iPhone using Tapatalk
  23. austin92

    6.9 idi wont fire

    Have a helper turn the motor over while you crack the lines open on the injector one at a time until you see fuel. Check all 8. Also with it getting cold If your glow plugs aren’t working it won’t fire. Try plugging in the block heater. Is it smoking while you crank it over? Sent from my...
  24. austin92

    Why doesn't my pickup have anti-sway bars?

    Mine doesn’t either but there’s aftermarket available. As to the why, I couldn’t say for sure but my truck has no sway issues and you say yours doesn’t. Maybe that’s why ford never put them in Sent from my iPhone using Tapatalk
  25. austin92

    Shaking violently when first accelerating from stop

    It won’t hurt the trans. You’re just intentionally burning the clutch one good time Sent from my iPhone using Tapatalk

Latest posts

Forum statistics

Threads
92,929
Posts
1,155,108
Members
26,430
Latest member
Brownlee5212

Members online

Total: 877 (members: 3, guests: 874)

Share this page

Top