Search results

  1. Randy Bush

    truck problems

    Have a 1999 PSD, My wife and sister took it camping. So problem- just fueled it up, positive green pump. But now when driving it after a mile starts chugging and dies , it will start right back up and do the same thing. Ideals? thinking fuel filter . Am gather some stuff together to go and try...
  2. Randy Bush

    Pulling a C6 transmission

    I hate having to change the glow plug under the turbo. A real pain, just takes a little time and right combination of tools to do it.
  3. Randy Bush

    Pulling a C6 transmission

  4. Randy Bush

    Oil in Radiator

    Checking the fluids on my 90 IDI and see the is oil in the radiator. Probably means need to reseal the oil cooler. Just another thing really did not need to do right now. What a good way to flush the radiator afterwards?
  5. Randy Bush

    Reverse rotation fan "Left hand thread"

    Your blades should be face this way, anything else is wrong. Sent from my SM-A115A using Tapatalk
  6. Randy Bush

    84 6.9 idi NEED HELP

    From the looks of things the IP cover was pulled with the pump. Going to have to remove the front timing cover to insure everything is lined up correctly. I would see how freely it turns over and go from there.
  7. Randy Bush

    ZF5 swap help!

    On mine it was a close ratio when , I bought it dually IDIT, terrible for pulling heavy load so being transmission needed rebuilding. I used my front input shaft and took the gears out of a wide ratio gas. had to change so of the gears around to get things right , but now as a wide ratio the...
  8. Randy Bush

    6.9 idi 2wd t19 driveshafts

    You have left out way to much information for anyone to give you a answer. What style of cab do you have on the truck for starters. 2 piece driveline? Your best bet is to measure what you need for this truck. Rear wheels must be on the ground when doing so, slip yoke on the rear shaft should be...
  9. Randy Bush

    So What Did You Do With Your PSD Today?

    Was having trouble with my 99 starting in park and going all the way into park when stopped. Was talking to my brother yesterday and seems there are 2 torx screws up under the dash on the linkage that like to come loose. Sure enough they where tightened them back up and thinks work right now.
  10. Randy Bush

    The wife has murder in her eyes

    Just start pulling stuff, what could go wrong?:Thumbs Up Actually I have always thought one should take a bunch of picture just in case forget where stuff goes.
  11. Randy Bush

    A $6 obstruction wrench for IP

    The heads where famous for cracking. bottom end was not any to strong neither. One real problem with them and the gas engine was not playing close enough attention to how far the valves extended past the end of the valve or spring retainer cap when rebuilding, where by causing them to drop a...
  12. Randy Bush

    A $6 obstruction wrench for IP

    Pretty much. Poor excuse for a diesel. Sent from my KYOCERA-E6790 using Tapatalk
  13. Randy Bush

    A $6 obstruction wrench for IP

    The long one think actually bought back in the day when was working on 5.7 GMC diesels
  14. Randy Bush

    7.3 to 460

    If a automatic , transmissions are set up different , converter , shift pressures. And you really need a complete engine, everything.
  15. Randy Bush

    A $6 obstruction wrench for IP

    Couple of IP wrenches I have Sent from my KYOCERA-E6790 using Tapatalk
  16. Randy Bush

    Oil Pump Gaskets

    Metal to metal on that, IIRC very few engines use a gasket on the oil pump.
  17. Randy Bush

    So what did you do with your truck today?

    This what happens when you don't confirm your flip ball is locked in place. Had a Goose neck trailer on and was loading my manlift, come up then back down to make the hole. Lesson learnt always double check to make sure is locked in place. Did not make me any to happy, but could of been worse...
  18. Randy Bush

    oil type

    I run Rotella 15-40 and CARQUEST filters.
  19. Randy Bush

    oil type

    I run Rotella 15-40 and CARQUEST filters.
  20. Randy Bush

    C6 to T19

    Cross member may, driveline don't think so. what you can do is measure total length of both units that will give a good ideal. C6 will have a slip yoke on rear and T19 will have U-bolt flange. so still thinking no.
  21. Randy Bush

    new alternator doesnt have a plug

    Think you have the wrong one, should be one terminal for battery and a plugin for the other wires IIRC
  22. Randy Bush

    Injector torque

    My ford manual says 35 ft-lbs
  23. Randy Bush

    Hot Shots secret stiction eliminator....

    I use it in my 99 PSD sure seems to keep the oil cleaner.
  24. Randy Bush

    Swapping pushrods with a different motor?

    I don't know if for the 6.9/ 7.3 but for a lot of engines you can buy over and under sized pushrods so after head work or such the lifter plunger can be centered in the lifter. This may be the case with the E-bay ones.
  25. Randy Bush

    Swapping pushrods with a different motor?

    Nope. LOL When I use to rebuild those where two things that got replaced a lot.

Latest posts

Forum statistics

Threads
92,929
Posts
1,155,105
Members
26,430
Latest member
Brownlee5212

Members online

Total: 840 (members: 3, guests: 837)

Share this page

Top