Search results

  1. Randy Bush

    Frost plug removal

    You punch a hole in the plug to aid in turning side ways to get out.
  2. Randy Bush

    Need more gears.

    when I first got my 93 IDIT dually it had the 4.14 low in it worse truck I ever for pulling a heavy load. Had to be careful on inclines starting out, had to rev it up to get going . and backing up was just as bad. Now with the 5.72 low can just let out on the clutch with out killing it and still...
  3. Randy Bush

    Need more gears.

    From what I have read and researched both the close ratio and wide ratio transmission where used with IDI diesels.
  4. Randy Bush

    Greetings from NW Montana

    LOL yep
  5. Randy Bush

    Greetings from NW Montana

    Welcome from another Montana guy.
  6. Randy Bush

    Need more gears.

    That is why you need the wide ratio ZF5 5.72 :1 . Did that in my 93 dually and it made a puller out of it. I pull 18 to 20k behind mine and have no trouble starting out on an incline. Plus you have 5.24: 1 instead of 3.79: 1 in reverse. Pulled my part out of a 4x4 IDI case so they are out there.
  7. Randy Bush

    code for rear axle?

    Looks to be 3.55 from what I can find.
  8. Randy Bush

    7.1 IDI???

    If an sleeve is put in correct it takes a lot to get one to move. In all the ones my dad did I don't ever remember one coming back because it moved, 50 yrs of doing them. Although on a lot of them he did leave a lip at the bottom.
  9. Randy Bush

    Glow plug connector idea

    have not got mine on yet, but am very pleased with the quality. :)
  10. Randy Bush

    Glow plug connector idea

    For what it is worth , information I have , factory wire size to GP was 10ga.
  11. Randy Bush

    Non- OEM parts

    Well after going to parts store to check on things I stand corrected and learnt something. Seems that parts store one are a cap and filter design. Where as the Ford is pretty much just Motorcraft. Guess is a captive part on Fords side. Kind of surprised me.
  12. Randy Bush

    Non- OEM parts

    I am talking about the filter itself, OEM one get them at pretty much any parts house. The filter and cap that was on mine I have no ideal where to get the same with out running all over town to try and find. So I f I was in bad need of one would be out of luck.
  13. Randy Bush

    Non- OEM parts

    Well I don't want any stupid aftermarket filter and cap that I may not be able to get anywhere. I will stick with the OEM style filter that I can get pretty much anywhere. Thank You.
  14. Randy Bush

    Non- OEM parts

    So am servicing my E99 PSD this after noon. Pull the fuel filter to put in a new Motorcraft one, new one does not fit the cap right. so run to Ford to see what is going on. Well someone put a non- Ford filter and cap on. Ford had a new on. Everthing fit and went back together just right. To the...
  15. Randy Bush

    Need help with new IDI

    Sounds like you have a GP issue .
  16. Randy Bush

    Need help with new IDI

    Kind of the way I am, but on a stock truck I kind of like sticking with OEM style parts. It solves a lot of normal problems. If one is boosting things for more HP that is different. Sent from my SAMSUNG-SM-J327A using Tapatalk
  17. Randy Bush

    4X4 Manual hubs or automatic?

    On my 99 dually have auto hubs , to me they are so nice around town pulling my trailer, little slick just turn the button. If they ever go bad they are getting replaced with the same.
  18. Randy Bush

    New Fuel Tank kit

    Did they supply the parts? If so they should make it right. If you bought unless they are real nice it will more then likely be your dime to fix sad to say. Sent from my SAMSUNG-SM-J327A using Tapatalk
  19. Randy Bush

    E250 blower motor resistor location

    This is for an 88 e150 but is the same. Sent from my SAMSUNG-SM-J327A using Tapatalk
  20. Randy Bush

    E250 blower motor resistor location

    It should be just to the right of the blower motor, between blower motor and engine.
  21. Randy Bush

    6.9 starter

    IMO NAPA ones fall in the cheap / not lasting group. Got one in my 99, getting about time to buy a good one,
  22. Randy Bush

    Tow bar for suburban

    Now that is a tow bar, should not give you any problems. Nice job. Don't forget to throw some safety chains on it.
  23. Randy Bush

    Race Truck Options

    Being I like seeing truck pulls I would lean to street/strip.
  24. Randy Bush

    Ignition Help for a friend

    That is normal when it breaks , you go down to the switch itself to operate it. Use like a Philips screw drive to stick in where the rod goes. the white plastic connector is the ignition switch.
  25. Randy Bush

    Ignition Help for a friend

    What is broke is the steering column lock actuator, pain to change is have not done it before. It controls the steering wheel lock and the ignition switch by the means of a rod. You can go down to the ignition switch , lower on the column and operate the switch there, off, run, start, although...

Latest posts

Forum statistics

Threads
92,929
Posts
1,155,105
Members
26,430
Latest member
Brownlee5212

Members online

Total: 841 (members: 3, guests: 838)

Share this page

Top