rreegg's latest activity
-
Good to know you found a local rebuilder up N in Canada. I hope the rebuild runs like a top for you for miles and years to come. :thumbsup: -
rreegg replied to the thread 6.9 IDI valve train questions + head gasket job.Does that mean your springs are “heavier” than spec? I’m not familiar but possibly recall reading about different spring weights
-
rreegg reacted to IDIBRONCO's post in the thread 6.9 IDI valve train questions + head gasket job with
Like.
All precups will crack like that. It's just a matter of time. It's something that we have to live with. It's possible that some of the... -
rreegg reacted to MasterChiefIDI's post in the thread WARNING about King Main Thrust Bearings with Like.
Got my nos Clevite thrust bearings in today. They measure 3.322-3.323" so in spec! I plan to run these.
-
rreegg reacted to IDIBRONCO's post in the thread New 6.9 IDI - Deciding if worth resurrecting or not with Like.
I had the same thing for a while. I called mine the twins. I've never tried, but Autozone may not have a compression tester for...
-
rreegg reacted to Smafugula's post in the thread New 6.9 IDI - Deciding if worth resurrecting or not with Like.
Hey everyone, New to diesels, not new to engines. I recently acquired a 6.9 IDI 1985 F-250 4x4 4 speed. I am making this post to see...
-
rreegg replied to the thread New 6.9 IDI - Deciding if worth resurrecting or not.not sure on that and hopefully someone else will chime in. My assumption as a non-pro (replaced injectors a few months ago on a tdi but...
-
rreegg reacted to Smafugula's post in the thread New 6.9 IDI - Deciding if worth resurrecting or not with Like.
I was gunna to try and upload a better picture of the plastic fittings but this forum is really hard to upload photos too. Basically...
-
rreegg replied to the thread New 6.9 IDI - Deciding if worth resurrecting or not.forget the specifics but it’s year-dependent and this is the “older style?”. If I understand your issue correct I recall running into...
-
rreegg replied to the thread Recycle oil.The resident expert has spoken! Really good to know thank you
-
Hey, quit being logical...or ill report you.....lol
-
.....i asked my injectors that very question one time..... they just stared at me...... But seriously.....it doesn't matter.
-
rreegg replied to the thread Recycle oil.Sorry I’m sure this is talked about in other threads but gonna ask it here again for continuity - can we run synth oil for WMO or is...
-
I keep used atf/oil mix in 55 gallon drums and I have a hand pump that I cut so it stops with 12inch from the bottom. I then pump about...
-
rreegg replied to the thread sticky equus gauge needle + gauge talk.Checked out some of the different options mentioned and VDO seems to be reasonably priced (under $80ish shipped) and available from...
