P
PNWNate
Latest activity Postings About
-
-
PPNWNate replied to the thread To penetrate or not to penetrate..I’ll let you all know here in a week or two after I get stuff cleaned up where I’m at and what happened. Just pressure washed the...
-
PI agree. You can't on our engines. You can't see past the pre combustion chambers into the cylinders. Again, I agree.
-
PI'm a "throw a hot battery or 2 in it and see what happens" type of guy. But report back so we can sleep better at night. Good luck, and...
-
PAnd yes, that's almost exactly what I did when I got my first idi 8-9yrs ago. I drove that engine for almost 2 years before it needed...
-
PI like your attitude. Some of these fellas are a bit tightly wound. I say juice er up and bar it over. If it’s stuck it’s stuck...
-
PI'm cheap so I'd totally soak it with ATF and breaker bar it with the glow plugs out of it. If it breaks free but has a tight spot id...
-
PPNWNate replied to the thread To penetrate or not to penetrate..Moisture exposure to the top of the cylinders is the most likely culprit, I’m just not sure how bad.
-
PIME, mechanical damage is usually already done, and you won't unstick anything with penetrating oil anyway. Penetrating oil may help if...
-
PHe does have something to lose, and that is a good, potentially rebuildable core. If you pull the injectors and get it to rotate...
-
PImho, you've got nothing to lose trying. You might get lucky.
-
PI’m still very new on here, so if I missed this thread, let me know and I’ll take it down. I just picked up an 86 idi with a seized...
-
-
Loading…
-
Loading…
