Nero's latest activity
-
Nero replied to the thread Coolant tank / overflow relocation ideas.I run the CDD one, and it expands the full volume of it, so when cold there's maybe a 1/4" of fluid at the bottom. I made little L... -
Yeah it got a little hectic. I had to be back home by Friday which is about 26 hours away so was in a hurry. Got the car running. Took...
-
Nero reacted to 8769bigred's post in the thread 6.9 IDI valve train questions + head gasket job with
Like.
I also got to unbox some new parts that showed up. I got a pro vent 200 crank case filter, exhaust parts and intake piping for the... -
Nero replied to the thread Truck running weird.If you get a psi gauge that you can clip onto the Schrader you can measure lift pump pressure. At idle you want about 4psi, and about...
-
-
Nero reacted to 8769bigred's post in the thread 6.9 IDI valve train questions + head gasket job with Like.
Made some progress today!! I got one cylinder head assembled today. I opted to use the ford OEM ‘umbrella’ seals on the exhaust valves...
-
Nero replied to the thread Truck running weird.Entirely possible. Fill er up with fresh diesel and some sort of biocide, replace the filter again and go drive er some more. Fuel...
-
Nero replied to the thread Source for quality rotors?.I second this. I prefer local for parts like these, only because I've had new in box drums with hot spots in them and had to warranty...
-
Nero replied to the thread Grease for driveshaft slip yoke splines?.@franklin2 you are 100% correct. To clarify, I use valvoline red hi temp for my wheel bearings and u joints.
-
Be careful saying that. For example you have wheel bearing grease which is much thicker than chassis grease. We were also where I work...
-
And be sure to find your way home from being lost again! ;Poke
-
Nero replied to the thread Happy 4th of July OB.Everyone, be sure to keep all your fingers and be safe out there :peelout
-
Nero reacted to scsmith42's post in the thread 2000 mile trip in 1990 F250 with 2,400 lbs in bed? with Like.
That was some good insight about the Timbrens, I’ll keep that for future reference. The F250 does not have any overload Springs on it...
-
Nero replied to the thread larger fuel return hoses/ caps on the 7.3 vs 6.9 IDI.Nope.
-
Nero replied to the thread 2000 mile trip in 1990 F250 with 2,400 lbs in bed?.For the cost, I'd do just bags...
-
-
Nero replied to the thread 2000 mile trip in 1990 F250 with 2,400 lbs in bed?.Sounds like you have a good game plan. The frames on these are pretty soft, I was able to drill the mounting holes for mine with a...
