F
Fixnstuff
Latest activity Postings About
-
-
FFixnstuff replied to the thread Throttle cable melting.YES that 'Z' bar resistor gets EXTREMELY HOT. Hot enough to ignight any combustible material that comes in contact with it, possibly...
-
FFixnstuff replied to the thread GearVendors Overdrive with 7.3 C6 transmission, torque converter and output yoke.I'll buy it right now. It's about 7 PM, I can't leave here until about 7:30 but could be at your location in about an hour and a half...
-
FFixnstuff replied to the thread Glow plug controller issue..The pitting on your battery terminals is caused by arcing from a bad connection / bad cable end. BATTERY CABLE ENDS (the battery...
-
FFixnstuff replied to the thread power steering pully.LOTS of these trucks with various gas engines used the same power steering pump same pulley and sometimes the same aluminum mounting...
-
FFixnstuff replied to the thread Mech changed Injector pump now I got black smoke....Dieselcrawler, Your video on setting timing with the Tech-Time 3300-S received some excellent comments, including the suggestion to...
-
FFixnstuff replied to the thread Tricks for removing steering wheel?.One thing the actuator does is locks the shift lever in PARK. a safety feature as you've mentioned. \ I'm so tired, I can't read or...
-
FFixnstuff replied to the thread Tricks for removing steering wheel?.Yes, 'Ignition Actuator' at Autozone (A Dorman part) and it's $11.99, pick up in store. If you ever have to do it again, remember this...
-
FFixnstuff replied to the thread Tricks for removing steering wheel?.Similar steering issues in my truck, since then completely fixed. Truck was pulling to the right and steering wheel did not return to...
-
-
FFixnstuff replied to the thread Tricks for removing steering wheel?.FIRST OF ALL: Do you KNOW for certain if you have a tilt steering column or a non-tilt (straight) steering column. I ask that because...
-
FFixnstuff replied to the thread Tech-Time 3300 ??.To re-confirm: as I recall (from a few years ago) the magnetic probe is to be inserted into the tube on the RIGHT as you are facing...
-
FFixnstuff replied to the thread TQ lock unlock clunk.In addition to checking universal joints and carrier bearing I suggest examining very closely the engine and transmission mounts...
-
FFixnstuff replied to the thread TQ lock unlock clunk.I think it's a pretty basic fix with basic mechanic skills (properly using tools and having the right tools always makes things easier)...
-
-
Loading…
-
Loading…
