Black dawg's latest activity
-
BBlack dawg replied to the thread What is the preferred method for lining up the axle pivot bushings on twin traction beams with leaf springs?.Works best to not have the springs in there. Put pivot bolts in, then springs bolted to truck, then springs bolted to front end.
-
BBlack dawg replied to the thread 96 - 94.5 powerstroke part swap can I do it?.My next step would be to plug scan tool in and check cps signal on there, and buzz test.
-
BBlack dawg replied to the thread 96 - 94.5 powerstroke part swap can I do it?.Does this still have the early computer as well? If so come up with a newer one so you can get datastream from it.
-
BBlack dawg replied to the thread 96 - 94.5 powerstroke part swap can I do it?.How and where are you measuring the 1000psi?
-
BBlack dawg replied to the thread 96 - 94.5 powerstroke part swap can I do it?.Are you sure the valve is bad? Without the nut and spacer, the valve does not get controlled very good and can cause no starts and stalling.
-
BBlack dawg reacted to MasterChiefIDI's post in the thread Valve Recession and Fel-Pro's head gasket.. with
Like.
For anyone interested, I plan to use Comp Cams 7706-1 push rod checkers to take up lash coupled with a few old modified lifters made to... -
BBlack dawg replied to the thread New 6.9 IDI - Deciding if worth resurrecting or not.I wouldnt worry about the ether use. As long as it does not show a bunch of blow by, it is probably fine. I have seen starting fluid...
-
BBlack dawg replied to the thread Maxtow gauges.Make sure to have the sender mounted in a way that oil can drain back out of it. As much oil gets in the intake of these, I think even...
-
BAbsolutely......that's why I have my "form letter" response to when the subject comes up...... you CAN'T approach it lightly, but if...
-
BBlack dawg replied to the thread Explain Biodiesel for me?.I am sure there is something to that..... Just hate to see somebody that relies on a truck to be running oil through it cause the...
-
BBlack dawg replied to the thread 085 better spooling, zf5, and intercooled.Yes, but the 088 uses an integral exhaust housing, would need to fab up basically everything on the exhaust side, including a way to...
-
BBlack dawg replied to the thread Explain Biodiesel for me?.I dont even know what to say about wmo anymore, other than....it is not free....but it will still save huge amounts of money even with...
-
BBlack dawg replied to the thread 085 better spooling, zf5, and intercooled.If starting with no turbo, I would use something other than an 088 kit. They are the slowest spooling out of all kits I have had, and...
-
BBlack dawg replied to the thread Cat 3126 motorhome......IT'S ALIVE!!!!.Not real familiar with these, but isnt the fuel system very similar to the 7.3 powerstroke?
-
BBlack dawg replied to the thread Doing oil cooler. Is this trick legit?.The gasket squishes farther over time. If you notice, torquing most headbolts, the last little bit, the bolt starts to feel springy...
