Tires are road adventure 33 inch tires. About half life left on them. I will look into the front u joints and c if that's my problem. Never really happens at lower speeds tho
Thanks everyone
I was wondering that to. How would a front u joint cause it to jerk and pull hard "very hard" left? If I'm just driving straight. Also the hubs are unlocked as a side note. Does it with hubs locked and unlocked.
Red head? The shaft seems tight and when I turn the steering wheel the wheels turn, no play. Also I turned the steering wheel fully both ways to see if anything was messed in the steering box and it doesn't skip or jump at any point.
Trucks stock height.
Steering wheel wouldn't really jerk but when it would happen the hole truck would jerk left and pull very hard to the left, would stay like that for a few miles sometimes. I would have to turn the truck hard right to keep it going straight. Then all of a sudden it would jerk back to normal and...
Hello everyone, My truck before I parked it (in process of engine build) would do a very strange thing that's got me all confused
Truck first had death wobble which was caused by a bad end link, fixed that. Then about a month later While I would be driving down the highway it would randomly...
Just checking in again, Found the northern auto kits can come with .010 reduced height piston but not coated. Mahle has discontinued the std size and over size is on backorder. Is it a big deal to get coated/anodized pistons?
Typ4 what is the availability on the cam you carry and what is the...
I planned on those comp springs, do i need to shim them?
Was planning on having block tested. The marks in the cylinder are from the piston coming off the rod, not cavitation.
Marks are honable out. (luckily) rod and main bearings look good. After removing the bad piston and rod it turned...
Thank ya typ4,
Is your cam strictly for low end torque or wide range? Is it custom ground? Also do you have any graphs or specs for it?
how much For the cam? And what other parts do you have or that's out there that might be performance related, or rebuild related? And do you know who...
Yup, rite before 190,*** and I've seen that book. Typ4 I can't seem to find the kit you are talking about? Also what company are you from again? How much for the torque cam( does it come with lifters), And the rods?
Also how much effect does it make on the engine dropping compression? Also...
Also I know rods and pistons are different On stock turbo engines, and exhaust valves are bigger, is there any other parts that are different from non turbo engine I need to find? Will regular headgasket work?
More pics
Hello everyone,
The old 7.3 is all done. Fired it up and heard a loud knock so I shut it off Quick. Tried turning It over by hand and nothing. So out came the engine.
Dropped the oil pan and found a big mess of piston. Popped the heads and yanked the pack out. Rod bent, piston destroyed...
Hello everyone, kinda new to the site and wondering if you all could help me with an oil leak?
I have an oil leak at the feed line for stock turbo. It is leaking at both ends where the tube comes into the brass nut. I believe by researching that they use packing on the line to seal it. Im...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.