160242 is the part number from a rear wheel. I sent Alcoa an email asking for the center bore measurement. The seller said the center bore is almost 6", which is very close to what I have found listed for my truck's center bore.
WTB: Dually wheels, alloy
- Thread starter cardana24
- Start date
79jasper
Chickenhawk
Those are listed as being for ford.
Those may be the recalled ones. Free replacement from alcoa.
Sent from my SAMSUNG-SM-G890A using Tapatalk
You must be registered for see images
Those may be the recalled ones. Free replacement from alcoa.
Sent from my SAMSUNG-SM-G890A using Tapatalk
Thank you for the good information! Is the center bore listed on that chart? What's the 4.88 number? I checked on the recall from Alcoa and I think these wheels are too new. The one that he sent me information on was manufactured in 97, and the recall stuff stopped some time in 96.
Here is the reply that Alcoa sent me:
We only offer 1 wheel that will work for your vehicle. The part number is 160281 (steers) and 160282 (drives). You should be able to purchase these from any distributor. If you have any questions let me know.
According to the chart above I am thinking he is telling me that the 4x4 wheels should fit my truck (and they may), but my truck is a 2wd.
We only offer 1 wheel that will work for your vehicle. The part number is 160281 (steers) and 160282 (drives). You should be able to purchase these from any distributor. If you have any questions let me know.
According to the chart above I am thinking he is telling me that the 4x4 wheels should fit my truck (and they may), but my truck is a 2wd.
79jasper
Chickenhawk
4x4 will work on 2x4 and vise versus. At least I've swapped them before.
4.88 is the hub size.
Page 10-11 here. https://www.google.com/url?sa=t&sou...I5opWUNOFRA-eB_UA&sig2=OT60x6XetkWbMAID49tjLA
Sent from my SAMSUNG-SM-G890A using Tapatalk
4.88 is the hub size.
Page 10-11 here. https://www.google.com/url?sa=t&sou...I5opWUNOFRA-eB_UA&sig2=OT60x6XetkWbMAID49tjLA
Sent from my SAMSUNG-SM-G890A using Tapatalk
okay, they replied again. It seems that the 2wd wheel is no longer in production, that's why he told me about the 4x4 wheel since you can still get that one. And he confirmed the hub bore is 4.88. These aren't the exact wheels I want but I do like them. What are these normally selling for, for a set with no lug nuts and no center caps?
Yeah, I already have steel wheels so I don't need those. So yes, I am only looking for aluminum.
i have a nice set.
missing drivers side front cap
missing drivers side front cap
You must be registered for see images attach
Are those Alcoas or Eagles? How much would you want shipped to VA?
Similar threads
