WTB - '88 F250 IDI fuel heating element with plastic frame

[ironhorse2021]

Hi,

1988 F250 IDI fuel heating element (metal plate with plastic frame). Mine leaks and has been epoxied together so I can't re-seal it. Ok if yours needs orings.

Will take the entire fuel filter manifold with heater installed if you have it.

Thanks,

John.

 

[gatorman21218]

Why cant you re-seal it? On mine I took the whole filter assembly apart and filled the hole with jb weld. Post a topic in the 7.3 forum and i can walk you through it there if you want.

 

[ironhorse2021]

Thanks Jimbob - I'll do that. The reason I can't rework it is because the PO filled the plastic terminal tower with epoxy (which now leaks). I can't separate the metal heating element from the plastic frame to replace the oring in between them. I'd like to keep the heating fucntion if possible which is why I'm looking for a functional replacement.

regards,

John.

 

[dagreendeville]

i posted in your other thread pm me if interested ill check tomorrow if i still have an extra and if u pm me a phone number ill text pics if possible