Well finaly got around to doing it on my truck and learned the hard way all OBS PSD downpipes are not reated equal. I used a MBRP downpipe and it was a PITA to get it to work. we couldn't figure it out it looked so simple in the write up but we couldent get the angle right finaly we welded some pipe back on at a diffrent angle and it fits nice. Got home and looked at the tech article and figured out the problem the MBRP DP is bent difrently it would still bolt right up to a PSD but was much more complicated to use for this mod.
So when doing this mod be careful of whos DP you get.
So when doing this mod be careful of whos DP you get.
