You must be registered for see images attach
After the layers of chassis saver and urethane sealant around the edges and new windshield. The white Monstaliner was put on. This is midway through 1st coat.
You must be registered for see images attach
Here it's done. It turned out okay. It started to cure half way through the second coat so i got chunks of rubberized coating in it. So that sucked. If i want it to look better only choice is to do another coat. Important thing is it's completely rust and water proof now. At least for the next 50 years or so hopefully.
You must be registered for see images attach
After i got the roof all sealed I did a leak check and hoped to find nothing. Butttt..... still had a damn leak. So long store short, i ended up pulling all the windows out and resealing the Butyl between the window spacer in the van. It wasn't too bad of a job and was much easier than I thought it would be. Manged to not break any of the glass. The old Butyl came off fairly easy, which is probably why it was leaking.
You must be registered for see images attach
Found more rust under this window so sanded it all down and put a layer of chassis saver, then white touch up paint where it would be seen. Glad I got this rust cleaned up. Also, all the nicks that were created getting the windows out were sealed back up with touch up paint.
You must be registered for see images attach
Another shot of the windows out. The edges cleaned up real well with MEK.