Real Easy Injection Pump removel Trick

[icanfixall]

I learned that some have trouble removing the injection pump and end up taking all the hard lines off for clearance... Not really necessary. Watch the viedo and see how simple it is.. Even a caveman can do it...
http://www.oilburners.net/forums/sh...oore-Timing-an-IDI-engine&p=748541#post748541


http://www.youtube.com/watch?v=DyhgOhS1OhY&feature=c4-overview&list=UUXOWdff_Gl2acaZwXcYHAKg

 

[Devon Harley]

I install an pull the ip everytime as a whole. Never thought it should ve done other way or that it was. my gf calls em the spider web thingy haha.

 

[gandalf]

Gary, you hit the wrong video. I just watched your timing meter.

You've made a number of these quick 'hot to' video for us all. Could you maybe post a list of links for them all? You might even convince the powers-that-be to make it a sticky.


Check all they videos you posted today. I've seen at least 2 of this same one so far.

 

[vegas39]

I've never had a problem removing the pump with the lines on either, must be luck.

I do remove the top pump mounting stud as I'm sliding the pump back, seems to give it that needed clearence.