6 Nebraska IDIs
Registered User
- Joined
- May 27, 2007
- Posts
- 4,247
- Reaction score
- 15
Okay guys, got a problem. We got everything worked out and pre lubed and everything, and now it wont fire.
The first second we cranked it over it fired a couple, probably what was left of the ZEP oil we'd put in the tops of the cylinders. I dont know whats wrong with it. Everything is wired in. I know the pump is turning on because I have fuel at the injectors.
Its not even trying at all. Just crank crank crank. Smoke is rolling up into the engine compt probably from a leaking turbo up pipe since we separated the thing again to do this swap.
Whats your thoughts?
The first second we cranked it over it fired a couple, probably what was left of the ZEP oil we'd put in the tops of the cylinders. I dont know whats wrong with it. Everything is wired in. I know the pump is turning on because I have fuel at the injectors.
Its not even trying at all. Just crank crank crank. Smoke is rolling up into the engine compt probably from a leaking turbo up pipe since we separated the thing again to do this swap.
Whats your thoughts?