FORDF250HDXLT, I did not romp on it. I took it slow and average. The truck is a little loud, so we are thinking there may be an exhaust leak. But i saw 4 pound of boost without any real strain.
Jred, the plan is to turn up the pump this Saturday. Going back to Punk's for a a good look over to make sure everything is happy.
Brandon, i have yet to romp on it. But is does have a cool whistle to it now.
By the way, I did not leave Punk's until 0530 Sunday morning.
Did you get to drive any more IDI's last weekend?
Mel, Punk used a air hammer, breaker bar, and a hand hammer to clearance the firewall. Wasn't too bad really. It needs just a tad more clearance for the driver side up pipe and all should be good.
This week I plan on removing the rest of the stock exhaust and hooking up all the gauges. I plan on running 4" straight pipe from the down tube all the way out to the factory location behind the right rear tire. Cant wait to hear that sound.
We ran the wiring and installed the probe for the pyro. By weeks end I will have the boost, pyro, and tranny temp gauges all wired in and functioning.
Still trying to get the pic's and videos to upload to my computer. Once this happens, I will share with everyone.