flareside_thun
Reviving The General Tao
Enough with the chit-chat...where's the pics?
Ok I ordered the centrifuge filter today as well as the remote double filter bracket. I picked up a transfer pump on sale ( ac ) and found two 1/4 HP DC motors I can slave together to run the 100 gph 150 psi Procon pump. That way I can run and recirculate semi clean fuel and finish filtering on board drawing off a day tank when on the road. Means I can pick up waste fuel on the go. and simply run it through a large particle filter before I throw it into the bed tank. Which will once filtered feed the aft stock tank, the forward tank being reserved for diesel
I'm about $200 into it at this point and my estimate of $300 is going to be low by about $100
the main pump motor is costing me about $60 plus the pump head which adds another $70
then I've got to get a DC filter heater which is about $70
that as well as a few bits and pieces which bring me up to a little over $400 total
then to find a descent bed tank in the 150~220 range which I dont absolutely have but it would be nice for road trips
cheers
I should be up and running within the month
B