Make me an offer I cant refuse.........

[metrojd]

Here is what I have ....

Ats complete Turbo non waste Gated set up
Has Hypermax center rebuilt by J&H Turbo less than probly 10,000 miles

A Mostly complete 7.3 IDI out of my CC,
Sold Serp. Belt set up
pulled off but still have...
injectors
Factory Turbo Injector Pump rebuilt less than 20,000 miles ago.
Water Pump, Not on long, Maybe less than 10,000

I also have ....
GP harness complete w/controller in good cond. insulation below connectors on the GP ruff
1 new Motorcraft GP
6 Motorcraft GP in truck for a few month's
a few Champion GP used
2 sets of lines
1 injector pump , dont know a lot about it, It is clean...
2 sets of Heads, both tore down but have all parts, 1 dropped a valve.
2 Fuel filter housings
1 bare block
1 extra Crank.
Valaeo Clutch in awson condition out of my CC less that 20,000 miles can still see the machine marks on the Pressure Plate.
Dual Mass Flywheel out of my CC
An exrta Oil cooler cleaned , needs resaled.
Oil pan sandblasted and pailned last year , never reinstalled.

Make me a reasonable offer.......
I dont need so I will make a package deal...
Im sure there is more. Let me know
Thanks
John

 

[MUDKICKR]

how much for the crew cabs cab?

 

[metrojd]

how much for the crew cabs cab?

Sorry...
Not parting the truck Just selling the Motor and some Parts.
I am putting a PSD in...

 

[383man]

how much do you want for all the stuff with the turbo kit

 

[metrojd]

how much do you want for all the stuff with the turbo kit

If you are serious...
I figured the almost complete motor was worth around $500.00?? since it was a running motor
The turbo ?? around $800.00??
Factory Turbo IP $ 150.00??
Thats $1450.00
Figure in all the other stuff that is getting harder to find....

oh ... I forgot I also have 7 extra rods and Pistons.

How about bring a truck and Ill load it all up

$1500.00

 

[metrojd]

All Pm's replied to....

Please ....
When asking about Parts that I have 2 of , Specify which one.....
It will save me alot of typing.
Thanks
John

 

[metrojd]

I am willing to do some bardering......

I will consider some trading......
let me know what you have..

OBS

I am lookingf for a front Bunper with lower cout out.

Font Power Window Tan Door Panels.

Front Tan seat with Center Consol.

And ???

Let me know
Thanks
John

 

[metrojd]

Lots of lookers.......

Lots of Lookers but no $$$$$$$$$$$$

 

[metrojd]

Pics of Turbo

You must be registered for see images attach

 

[ferrellmedia]

I might be interested in the turbo setup, what other parts would be needed for me to install this in my 1993 F350 dually with a 7.3 nat aspirated?

Like, I don't see the intake hat where the turbo blows the air into.

How much and what additional parts would I need to be complete?

 

[metrojd]

The hat is in the middle of the pic.
looks like a silver Snail.

Have everything ..
You would only need to get the Gromet for the oil drain back in the Vally and the Gromet for the Valve Cover.
Mine are Hard and cracked when I tried to get them out..

I just pulled it off my 93CC Dually That is NA.

Thanks
John

 

[DragRag]

PMed about I.P. and motorcraft glow plugs.

 

[metrojd]

Pm Replied

PMed about I.P. and motorcraft glow plugs.

replied to the Pm....Thanks
John

 

[Cincinnati Guy]

how much for the clutch?

 

[metrojd]

Clutch

Make me an offer..
I had no issues, Just can't use it...

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach