****** is the best!donkey punching your aunt
put your auntie to the test?
odd that you would even think of your aunt on your knob
****** is the best!donkey punching your aunt
Lol it's okay, I don't have an aunt, moms and only child, that just sounded pretty mean so I went with it****** is the best!
put your auntie to the test?
odd that you would even think of your aunt on your knob
Wrong wrong wrong....nasty...***** wrong.......meaner than donkey punching your aunt at your cousins funeral....I like it.
That would be great if the vehicle had been in running order at the time.A really easy way to loosen washers is to just back off the injector one turn and start the engine for about 5-6 seconds. Rev it once or twice. The washer will be loose when you pull the injector.
How do they really "go bad"? The mechanism is so simple I just dont get what is actually failing on them? My co worker used to just clean and rebuild them with new seals and springs. He kept a spare set that was freshly rebuilt at all times.
The main wear item is the nozzle, these are simple injectors but over time their pop pressure decreases which makes for a poor spray pattern. Also the nozzle can be clogged with carbon causing poor spray pattern or cause the injector to hang open, dumping fuel into your engine.How do they really "go bad"? The mechanism is so simple I just dont get what is actually failing on them? My co worker used to just clean and rebuild them with new seals and springs. He kept a spare set that was freshly rebuilt at all times.
I think I would be buying better quality injectors.I bought two brand new sets of stanadyne injectors off eBay, one for my sons truck and one for mine.
I had an issue with my truck running bad after 1,000 miles, so I changed them all out again.
Turns out I had one go bad.
Anytime I've ever bought new injectors, seems like one goes south after a few hundred miles.
It wouldn't hurt to buy an extra one or two to keep on hand.
I've bought injectors from even the best and had one bad one, it happensI think I would be buying better quality injectors.
Sent from my SM-G892A using Tapatalk