Help IDing a turbo.

[rjjp]

I acquired this turbo last summer, and I believed it to be for a 1st gen stroke, but the AR is 1.0 rather than 1.15. Can anyone here point me in the right direction on this?

Sticker on the compressor housing

You must be registered for see images attach

Exhaust AR

You must be registered for see images attach

Compressor AR

You must be registered for see images attach

You must be registered for see images attach

 

[Black dawg]

the 1.15 will be on the exhaust housing.

 

[towcat]

the blue tells me it's removed from a Navistar product.
T444E rather than a PSD which is usually painted black.

 

[Diesel_brad]

I am with Calvin. That blue /green is a dead giveaway. Fords PSD turbos are bare aluminum and cast steel And that bracket on the intake side is diffinaly not on a PSD pickup turbo

 

[Black dawg]

I guess I didnt see that was the exhaust housing, and I agree on non ford.

 

[94f450sd]

I am with Calvin. That blue /green is a dead giveaway. Fords PSD turbos are bare aluminum and cast steel And that bracket on the intake side is diffinaly not on a PSD pickup turbo

then you havent seen a 99-up turbo.the bracket is for the wastegate actuator on 99-03 SDs.

international and ford use the same same turbos except on the school bus motors.

 

[rjjp]

then you havent seen a 99-up turbo.the bracket is for the wastegate actuator on 99-03 SDs.

international and ford use the same same turbos except on the school bus motors.

Any chance the .82 AR wastegated powerstroke exhaust housing would fit this turbo? It looks like they are the same, and I know where I can get one, I have access to two wastegated powerstroke turbos for parts, one with wasted bearings, the other ate something and screwed the impeller.

 

[94f450sd]

it should fit.only difference i know of is the ford runs the ebpv and a waste gate and IH doesnt.

 

[rjjp]

it should fit.only difference i know of is the ford runs the ebpv and a waste gate and IH doesnt.

This has an EBPV.

 

[94f450sd]

http://www.superdutydiesel.com/foru.../2442-internationals-version-powerstroke.html

you may have to become a member to see the pics but these are picture of a T444E turbo on a truck i was doing a clutch on a few years ago.