Fuel Line Clamps

[big van]

I'm getting some air in the system and have a question. I replaced the screw clamp on the line retuning to the tanks but the back 2 injector lines coming to the tee for the return line are wet. I think I'm still getting a little air in at these lines. It bleeds down over night & stumbles a little on start up.

I replaced them about 2 yrs. ago when I put an IP, injectors, and fuel line kit on. My question is does anyone use different clamps? I'm afried to use screw clamps for fear of braking the plastic injector caps. Any ideas. Thanks

 

[icanfixall]

I use only what the kit sends. They have never leaked on me before either. You probably need to replace the return line kit again. Two years is only costing you about $12.00 per year....

 

[big van]

Are some kits better than others? I used the kit I got from Fuel Injection in Allentown,PA where I got the IP & injectors. I don't remember a name but I would think it should last more than 2 yrs. The other one was original from 91 & didn't leak.
If there's a kit out there better than others I'll try that one.